Zeks 400ZHADHM00H ZHA Eclipse Heated Purge Desiccant Air Dryer New

Description: All items are sold as is without warranty unless specifically stated in the posting. This does not mean that the unit doesn’t work, only that we have not tested or checked it out. This may also mean that we are not knowledgeable in this specific item. The Item may vary from picture as manufacture may change model appearance. We reserve the right to charge a 20% restock fee on ALL items. Zeks 400ZHADHM00H ZHA Eclipse Heated Purge Desiccant Air Dryer New comes with what you see in the pictures. If you don't see it, you probably won’t get it. Specifications are from manufacturer and may vary slightly due to upgrades, options, or revisions this unit may or may not have. eBay’s description of “USED or FOR PARTS OR NOT WORKING” and our description of “USED or FOR PARTS OR NOT WORKING” is different, therefore because eBay requires the filling in of this field, we state as “USED or FOR PARTS OR NOT WORKING” PLEASE READ OUR “CONDITION” for our description of “USED or FOR PARTS OR NOT WORKING” Model Number: 400ZHADHM00H Serial Number: WCH1036239 Desiccant: 302 lbs (137kg) Per Tower Input: 460 Volts, 60 Hz, Three Phase Minimum Circuit Ampacity: 7.5 Amps Maximum Fuse Size: 8 Amps Heater: 4.5 kW FLA.: 5.6 Maximum Pressure Inlet Air: 150 PSIG / 1034 KPa Maximum Temperature Inlet Air: 120° Fahrenheit / 49°Celsius Approximate Dimensions: 56.5” W x 34” D x 82” H Approximate Shipping Weight: 2,000 lbs Air Connection In/Out: 2 Retail Price: $39,448.40 Condition: New – Old Stock Includes 4 Jamesbury Valv-Powr Double-Acting Pneumatic Actuators Model Number: VPVL200DABD Serial Numbers: 18212752, 18169822, 18139594, 18169806 Maximum Operating Pressure: 116 PSI (8 bar) Operating Temperature: -40°Celsius to +80°Celsius Minimum Output Torque At: 80 PSI 47.3 ft-lbs. / 5.5 bar 64 Nm Product Information: ZHA Heated Purge Desiccant Dryers use desiccant media in a twin-tower design and a process of heated desiccant regeneration to make available very dry air for critical applications. High performance switching valves alternate flow between the two towers for simultaneous drying and desiccant regeneration for a continuous supply of dry compressed air. Regeneration air temperature is raised via the on-board heater to reduce regeneration volume requirements. Dryer operation is automatically controlled by a reliable digital controller that provides connectivity for remote communications. Features (May Include): NEMA 4 Electrical Enclosure High Performance Switching and Purge Valves Digital Controller With Remote Communications Connectivity Low-Watt-Density Heater Solid State Heater Relay for Long Heater Life Sound Attenuating Mufflers Multiple Filter Configurations Available Service-Friendly Design Assembled in USA Standard Features Include: Power On Light NEMA 4 Enclosure Programmable Logic Controller Left and Right Tower Regeneration Indication Tower Safety Relief Valves Heater On Light Adjustable Heater Thermostat Heater High Temperature Alarm Bi-Mode Operation ASME Vessels Tower Temperature Gauges Tower Pressure Gauges Left and Right Tower Drying Indication Control Options: MLC with DP Display Provides fully automated dryer operation based on continuous monitoring of the moisture content of the outlet air stream. During periods of low demand, the dryer will automatically reduce its average purge consumption by delaying the start of the regeneration cycle until required. Savings on cost of operation of 50% or more can be realized by incorporating this system. Ideally suited to applications where dryer has been oversized for future expansion, production shifts run at less than full capacity or where the environment has low relative humidity. This option includes a dew point transmitter that indicates outlet air pressure dew point on the DPC Display. Filter and Bypass Option: Package A with Bypass Pre-piped coalescing filter with automatic drain installed Pre-piped particulate after filter Pressure differential indicators on both filters. Three valve dryer bypass Dew Point Option: -100°Fahrenheit Provides high quality, extremely low dew point for critical air applications. Especially well-suited to electronics, chemical, or pharmaceutical applications, where even very small concentrations of water can affect product quality. This item MAY be subject to licensing by the United States Government for shipment out of the United States. Please allow up to 6 weeks for processing if required. The charge for freight will be determined by the destination upon the ending of the auction. There will be a packing fee on larger and heavier items it will be determined by the size and the care that has to go into packing an item. Most of the time, people are impressed with the job we do because we customize our own skids for larger items and we take the utmost care to provide a safe and cozy journey for your item. We strive to make our customers happy and want you to feel that we have treated you with the ultimate respect. International Customers & Freight Forwarders: International Customers: Prior to shipment you will be required to fill out, sign, and return an End User Statement that is required by us from the United States Government. It should take you less than 5-minutes to fill out, sign, and return. If this is an issue/problem for you, we are sorry, but your transaction will be cancelled and you may be subject to a 20% restocking fee. International Customers using a Freight Forwarder: Prior to shipment you will be required to fill out, sign, and return an End User Statement AND Freight Forwarder Waiver that is required by us from the United States Government. It should take you less than 7-minutes to fill out, sign, and return. If this is an issue/problem for you, we are sorry, but your transaction will be cancelled and you may be subject to a 20% restocking fee. Freight Forwarders: Prior to shipment YOUR customer will be required to fill out, sign, and return an End User Statement AND Freight Forwarder Waiver that is required by us from the United States Government. It should take you less than 7-minutes to fill out, sign, and return. If this is an issue/problem for you, we are sorry, but your transaction will be cancelled and you may be subject to a 20% restocking fee. These forms will be emailed to you directly and then you can forward them to your customer. Disclaimer: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, do not bid on this item unless you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. 3-6-2023 BF

Price: 25641.46 USD

Location: Phoenix, Arizona

End Time: 2023-12-06T18:03:08.000Z

Shipping Cost: N/A USD