White Vantech H1 60" Roller System with 24" Long Extension Plate

Description: White Vantech H1 60" Roller System with 24" Long Extension Plate Description Specs Payment Shipping Returns Warranty Description The H1 Roller with 24" Extension Plates extends the contact point of the rack passed the rear door. Eliminating damages that may occur when loading and unloading Ladders, pipes and other material or equipment. Extension Plates and Roller are made from aluminum and Anodized. The roller is slightly lower than the bars on the rack to not interfere the placement of your equipment. This roller system will fit onto the Vantech H1 ladder rack connected via the H1 eye hooks. Specs MSRP : 199.00 Item Condition : New Color : Powder-Coated White Extension Plates Anodized Silver Roller Bar Material : Aluminum & Stainless Steel Surface Finish : Powder-Coated & Anodized Compatibility : RAM ProMaster 2013-On, Nissan NV Cargo Van High Roof 2012-On and Sprinter Standard Roof 2007-On with Vantech H1 Rack system Warranty : 5 Years Bar Width : 60" Bar Type : A324 (2" round) Extruded Aluminum 1 : Prevent Damage to vehicle by extending the contact point pass the rear of vehicle 2 : Fits eye hooks on the H1 mounting bases 3 : Roller plates are 24" from end to end 4 : Roller bar is reinforced extruded aluminum 5 : Includes adjustable riser for extra support 6 : Max Riser Height: 2.75" 7 : Minimum Riser Height:1.25" 8 : H1 Mount/System no included 9 : Roller only available in silver Payment We accept the following forms of payment. PayPal Mastercard Visa American Express Discover Sales Tax For shipments to New York addresses, we are required by State law to collect 8.875% Sales Tax. Shipping Packages will be shipped via UPS. Please allow 5-7 business days upon arrival to destination. Be aware that sometimes packages will not get to destination on time due to weather conditions or suburban locations. Please provide us with your telephone # in case there is a problem. We regret that this item can not be shipped to PO boxes. Item can be combined with other accessories, But not complete rack systems. Returns Unused merchandise may be returned freight pre-paid in the original shipping packaging with all labels, hardware, instructions. Used or installed items are not acceptable for return. All returns must be accompanied by a RGA # and a copy of the original receipt. The RGA # must be issued within 30 days from the date of delivery. Products with or without RGA # can not be returned after 30 days from date of delivery. To obtain a RGA # please call the number in the header and have your invoice number ready. Special order items cannot be returns. Any items sent freight collect will be refused and returned at shipper's expense. All returns are subjected to a 20% restocking/return fee. If item was shipped during promo "free shipping" customer will be subject to a 25% restocking/return fee. Customer pays all shipping and handling charge going to and from destination. Once the item has been examined and the reason of return is verified, you will be issued a refund. Refund will be issued by company check to the receiver (stated on invoice) and will take approximately 5-7 business days to process. Claims for Shipping Damages Product that are damaged during transport must be reported to the carrier within 24 hours after receiving delivery. Otherwise customer will be held liable for all damages acquired through shipping. Please inspect all packages thoroughly before signing acceptance of shipment. A written statement of product condition and picture must be submitted through eBay to start claim. Failure to do so will result in lose of time and claim. Warranty Warrantee 5 year Limited warranty will only apply to those who submit their warranty info through e-mail. When e-mailing warranty information please provide us with the invoice number, name, address and date of purchase. We will then e-mail you a form to fill out. Once the form is filled out please e-mail the form back. Non-registered warranty claims will not be accepted after 30 days of receiving item. Covered on the warranty are as follow: Mounting bases and drip rail clamps. Cross bars, nuts, bolts, washers, anchors, and gaskets are not included in the warranty. Warranty does not cover bent, warped or normal wear and tear of product. All electrical products are covered by a 1 years warranty unless item is stated otherwise. All mechanical products are covered by a 5 year warranty. All warranty items must be shipped to Vantech USA Incorporated 150 New Hwy Amityville NY 11701. Customers must cover all shipping fees to and from destination. To submit a warranty claim message us titled "warranty claim application". A claim form will be e-mailed to you within 24 - 48 hours. Fill out form and submit picture(s) as required. A warranty agent will contact you in 7-9 business days. Canceling an Order You may cancel an order at any time prior to processing at our center by calling the number in header. Unfortunately, we are not able to cancel orders once they have been shipped. Please refer to our Returns Policies for returns. Special order item(s) can not be cancelled once an order number has been given or e-mailed. About Us | Feedback | Sell Smarter with Kyozou.Inventory and Ecommerce Management

Price: 177.39 USD

Location: Amityville, New York

End Time: 2023-11-12T13:46:35.000Z

Shipping Cost: N/A USD