Description: - Ideal for use with all Wax Necessities soft wax cartridges, 4 free cartridges included.- WX-4A heater offers a simple and reliable service, heating up to 4 cartridges simultaneously- Voltage: 110V- Frequency: 50Hz/60Hz- Power: 200W- Fits standard cartridges with the following measurements: Height: 13.5 cm / 5.31 inch, Length: 5.5 cm /2.16 inch, Width: 2.25 cm / 0.88 inch Technical specifications:Voltage : 110V Frequency: 50Hz/60HzPower: 200WCapacity: 1pcs 100 mlMax Temperature:100 °CNonadjustable temperatureBody material: ABSInner material: AluminumWarranty 1 yearIt fits standard cartridges with the following measurements:Height: 13.5 cm / 5.31 inchLength: 5.5 cm /2.16 inchWidth: 2.25 cm / 0.88 inch Wax Necessities WX-1I Wax Cartridge HeaterIdeal for use with all Wax Necessities soft wax cartridges, the WX-4A heater can hold 4 cartridges. On the exterior, the heater is molded in a highly resistant APSthermoplastic plastic resin, and aluminum is used for the inner construction.To prolong the life and efficiency of the warmer, it is recommended a cartridge always be inserted into the heating chamber. Do not pour wax directly into the heating well.To maintain the optimum condition of the heater, clean regularly. Your warmer has been tested before leaving the factory and is guaranteed against all manufacturing defects, under regular use, for 12 months from the date of purchase. If the heater fails to operate due to a defect in material or workmanship, we will repair or replace it with dated proof of purchase. The guarantee does not apply to damaged lids or heaters resulting from misuse or accident.For warranties, contact the manufacturer. INSTRUCTIONS FOR USE:Remove the heater lid and place the wax cartridge/s directly into the heating chamber(We recommend Waxness cartridges).Plug in the appliance. Light indicates power is on.The indicator light will remain illuminated during operation time. Please allow 15-30 min, depending on the ambient temperature, until the wax is ready to use.To ensure the wax has reached a suitable temperature and to avoid loss of profitable working time, it is recommended to plug in the warmer approximately half an hour before services begin.Unplug and cover with the lid when not in use.Caution: Locking the lid tightly may cause the lid to break. If the top adheres to the melting pot, pre-heat the warmer before lid removal to prevent the lid from cracking. IMPORTANT SAFETY INSTRUCTIONS:Read all instructions before using the heater!When using electrical appliances, basic safety precautions should be followed.WARNING:THE HEATER AND WAX ARE GETTING HOT. ALWAYS TEST WAX ON A SMALL AREA OF SKIN BEFORE APPLICATION.To reduce the risk of burns, fire, or Injury:Always test the wax on a small area of the skin before application.Do not touch the metallic surfaces of the warmer. The unit is hot when in use.Use only on a flat, solid surface.Do not plug in a unit where the power cord can be tripped on or where the cord hangs over the edge of the working table and can be pulled off.Do not leave the unit on, unattended.If the wax begins to smoke, unplug the unit immediately and have the electrician check.Allow the unit to cool before cleaning or storing.Do not leave children unattended around the working heater. Use the unit only for the intended use as described in this booklet.For best results, refer to Wax Necessities waxing instructions and instructions on the product package. DANGERTo reduce the risk of electrocution: (which can result in Injuries 8. and death)Unplug the heater immediately after use.Please do not use it in bathrooms or on wet floors and surfaces.lf unit falls into water, unplug it immediately. Do NOT reach into the water.Never operate the heater if it has a damaged power cord or plug, is not working correctly, or has been dropped or damaged.Do not connect more than 3 heaters on an extension cord. For professional use only!
Price: 69.9 USD
Location: Palm Desert, California
End Time: 2025-01-11T18:19:55.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Waxness
Type: Wax Cartridge Warmer
Color: White
Model: Waxness WX-4A
Features: Ideal for use with all Wax Necessities soft wax cartridges, Voltage: 110V - Frequency: 50Hz/60Hz - Power: 200W, Fits standard cartridges, WX-4A heater can hold 4 cartridges
MPN: SKU018123
Suitable For: Wax Roller Cartridge
