Water Pump & Fan Digital Controller Kit(12 & 24V) (Davies Craig) (Part #8002)

Description: ELECTRIC WATER PUMP (EWP®) & FAN DIGITAL CONTROLLER KIT (PART #8002)For optimum control of Davies, Craig 12 / 24 Volt Electric Water Pumps and other water pumps.Suits EWP®80, EWP®115, EWP®130, EWP®150, Thermatic® / Electric Fans and billeted style Electric Water Pumps.The controller offers enhanced appearance, slimmer and the seven-pin plug is safely tucked away, out of sight at the base of the Controller. It has 2 mounting options:BracketNylon Plate The EWP®/Fan Digital Controller has two specific functions:Will manage the operation of the EWP® by varying the speed of the pump in response to the coolant temperatureManage control of your electric engine fan.The Controller has a push-button to lock in any temperature from 40°C (104°F) to 110°C (230°F). It’s recommended you set/target the Controller to closely match your engine’s existing thermostat temperature.The Digital Controller will operate the engine’s electric fan automatically once the engine has reached +3°C (+5.4°F) above the targeted / set temperature. Another significant benefit is that the Controller allows the EWP® & Fan to run on after ignition shutdown for either 3 minutes or -10°C (-14°F) of set set / target temperature to eliminate heat soak.Visit the DC Tube page for installation demonstration videos at the Davies Craig website KIT CONTENTSITEMDESCRIPTION UNITS1EWP® Digital Controller Assembly 12Wiring Harness (includes 10AMP fuse) 13Temp Sensor 1/4 NPT14In-Line Adaptor (35mm ends - hose size fitting)15Hose Clamps26Ring Terminal17Rubber Sleeves 3mm (Increase In-Line Adaptor to fit hose size 38mm)*For larger hose size, you will need 6mm sleeves (Part #18511) which will increase adaptor to fit hose size 41~42mm *not in kit*28Mounting Options: Nylon Plate, Bracket39Instructions110Sensor Instructions1Technical SpecificationsTechnical Specification - LCD ControllerVoltage range12V DC to 29V DCDisplay LCD size64.6mm (2.54”) x 55.6mm (2.19”)Maximum current12AmpsWarning alarmHigh & low Temp., Above set temp., Sensor short circuit, Pump error, High & low voltage and Sensor open circuitTargeted (set) temperaturesSingular degrees from:40°C (104°F) to 110°C (230°F)MemorySet & targeted temperatureFan cut-in temp.3°C (5.4°F) above the targeted (set) temperatureController typePCB with micro-processorSensor typeThermister in housingOverrun/ shutdown-10°C (14°F) below set/target temperature or 3 minutesIndicatorsTemperature, power, EWP®, test, fan, high & low temp, voltage, above set temperature (with alarm)Weight135 gramsDimensionsLength = 98mm (3.8")Width = 95mm (3.7")Depth = 25mm (1”) The contrasting black & white screen and comprehensive diagnostic menu of engine cooling management at a glance includes;Numerical LCD exhibiting real-time numerical on-going engine & targeted/set temperaturesFlashing EWP® logo signifying pump pulse, width, modulation (PWM) operation and delivering the desired coolant flow through the engineIndividual, adjustable targeted/set temperatures from 40°C (104°F) to 110°C (230°F)Rotating Davies Craig Thermatic® Fan symbol indicating fan operation (which automatically engages at +3ºC (+37.4ºF) above the set/targeted coolant temperature.)Your set/targeted temperature can now be held in memory if the battery is disconnected.Override feature to assist with EWP® bleeding operation.Voltage output.A suite of self-diagnostic ‘test’ functions are still on offer that identify and deliver visual and audible warnings enabling simple trouble-shooting if a system problem is evident. An audible alarm will sound when;* Coolant temperature doesn’t exceed 40ºC (104ºF) within 5 mins of start-up.* Coolant exceeds +10ºC (+50ºF) of set/targeted temperature.* Coolant temperature exceeds 100ºC (212ºF).* Voltage supply is either too high or too low.* EWP error.* Temperature Sensor error.The LCD EWP®/Fan Digital Controller will manage the operation of your chosen EWP® or billeted electric water pump by varying the pump’s speed and subsequent coolant flow in response to engine coolant temperature, as well as manage the thermal control of your electric Thermatic® engine Fan/s.The EWP®/Fan Digital Controller becomes the engine’s new ‘thermostat’ and now has individual targeted temperature settings from 60°C (140°F) to 110°C (212°F). Programmed by simply pushing a button and holding down to set! In combination with a Davies, Craig Thermatic Fan®, or other electric engine fans, the temperature of the engine’s cooling system can be more precisely controlled. The EWP®/Fan Digital Controller will also operate the EWP® after ignition/engine shutdown, circulating coolant and rapidly dissipating heat more efficiently to avoid heat-soak.If the engine temperature cools below the targeted/set temperature, the EWP®/Fan Digital Controller will step back from full system voltage back to 12 or 6 volt operation and revert to pulse width modulation (PWM) mode when highway cruising.Major advances to the updated LCD EWP®/Fan Digital Controller are;Temperature setting is a simple push-button adjustment. Individual set/target temperature options commencing at 60°C to 100ºC (212ºF). The EWP®/Fan Digital Controller is factory set at 85ºC (185ºF).To eliminate heat-soak, a built in automatic time-out feature allows the EWP® to circulate engine coolant for up to 3 minutes or till coolant temperate is reduced to -10◦C (-14F) below the set/targeted temperature to eliminate heat-soak after engine shut-down. Temperature Thermal Sensor - can be mounted into the thermostat housing, top radiator hose or top of the radiator or engine block near the engine coolant outlet.The LCD EWP®/Fan Digital Controller weighs only 90 grams (3.2oz) and can be easily and conveniently mounted anywhere in the driving compartment.The LCD EWP®/Fan Digital Controller can be left at the factory-set 85ºC (185ºF), offering smarter engine warm up and enhanced engine management of the vehicle’s cooling system. Many drivers may prefer to select a higher set point for an even quicker warm-up and greater economy, switching to a cooler engine setting when full power is required. It’s that simple.Davies, Craig’s updated LCD EWP®/Fan Digital Controller continues to be a premium quality product ensuring its increasing range of EWP®s will exhibit the ultimate engine cooling experience. The LCD EWP®/Fan Controller was designed and developed right here in Australia! The Digital Controller, an EWP® and electric Thermatic® engine fan/s are three excellent examples of ingenious Australian innovation and design.

Price: 213.24 AUD

Location: Melbourne, Victoria

End Time: 2024-08-02T04:42:19.000Z

Shipping Cost: 55.78 AUD