Description: 2023 1 HP 900 Watt Servo Motor and Computer Controller and DIY built it in speed control switch. Includes belt and drive pulley. Vevor MX 8 X 14 Lathe 750W Servo Motor Base Kit Experimental D.I.Y. parts to assist in conversion this lathe. This is not a bolt on upgrade. It is a difficult conversion and requires additional machine work by a skilled machinist. You will need access to a working lathe and suitable milling machine to perform the required machine work. You may also need to make a spindle spacer. See Image 1 for what is in the box. All other images are for information only. Normal 0 false false false EN-US X-NONE X-NONE See you tube videos required before you buy: You tube videos required are: Initial set up of lathe before even trying to upgrade the motor part 1. Search: Vevor 8X14 Mini Lathe Initial Setup Part 1. The Required Fixes Just to make The first Cut Inc Review Installation of servo motor upgrade part 2. Search: Vevor 8X14 Mini Lathe Part 2 Servo Motor Upgrade and The Required Fixes Just to make work Inc Review Part 3 black box control unit (not required/included in this partial kit). Fits Vevor 8 X 14 Mini Lathe as seen in images.Does not fit 7 X 14 Mini Lathe. Does not fit 8 X 16 Mini Lathe.Does not fit any other lathe. Sold as a partial kit. You will have to have a milling machine + a working lathe and do machine work to make it fit.Allows for complete reinstall of all threading gears and auto feed systems. Each one is custom built when you order. When the build is complete, it will be tested for 20 minuets. Any defects found during testing will require a complete new build. This insures you do not have to deal with returns and exchanges due to manufacturer defects. All parts required to build are In stock. That means if it is listed as available, it is because we have enough parts to build at least two. We also stock extra parts in case of warranty. In past 3 years, almost all defects that would have been warranty have been caught and remedied during the above testing. End result is: We have only 2 out of hundreds that required a warranty replacement part in 3 years. In stock: Built with the new designs for 2023. Note: Most individual parts, timing belt with timing gears, spacers and adapters are available separately. Motor mount is not sold separately so if you plan to use a Vevor, you will have to weld your own. The horsepower improvement is incredible. Kinda like replacing the small block with a big block in your Mustang/Camaro muscle car. Just pure power, so much so that you will never use all of it. This system provides full power at any speed and that includes Spindle RPM's as low as 200 RPM's Motor and spindle speeds + Reverse: The motor speed can be programmed and or full range can be achieved with just the speed control knob: Speed control programming only requires a few easy steps. Reverse is simple, just hold the yellow button for a few seconds. Programming includes the ability to set bottom and top RPM range separately. In other words you can program the system to run the spindle at any speed or range of speeds you choose (see below). Slowest speed achievable: Motor 100 RPM = Spindle 60 RPM. Highest speed this one produced: Motor 3,500 RPM = Spindle just over 2,000 RPM's. Note: it is not recommended to spin the spindle any faster unless you upgrade the factory installed spindle bearings. Motor Specifications:Watt: 900 (1.0057665666 HP)Voltage: 110VHZ: 60Torque: 11 N.M.RPM: 100 to 3,500 RPM in 100 RPM increments. Note: Manufacturer recommended 500 to 4,000 RPMs My personal testing results: This motor runs best between 300 and 4,500 RPMs.Ratio of belt drive:1.6 to 1 (motor turns 1.6 revolutions to every revolution the spindle turns) System includes:A new 900 watt motor like the one seen here in photos above. Motor will come with the motor mount installed. This will require adjustment to fit your lathe. It will also come with the small timing pulley installed on it using a 5 mm key-way and main shaft nut. A new 2023 control computer like the one seen in the above photos. This control unit is built by The Custom Crafter to include: Built in Thermal overload protection rocker style switch with reset function. See photos, make note of the orange power switch with the word RESET. If your switch is red or if it does not say reset, it does not have thermal overload protection.A DIY build it into your machine speed switch. Includes estimated rpm sticker as seen in images. The power supply wire to run the original tach with the new controller. The Custom Crafter made in the USA motor mount. Installed on motor, Includes thick washers and grade 8 nuts.One custom made polished and anodized aluminum spindle timing pulley. See photos.One custom made polished and anodized aluminum motor timing pulley. See photos. Comes preinstalled on motor.A new L050 1/2" wide timing belt. See photos. Access to on line active programming instructions and fault codes. Written in plain English and by us.. Includes recommended programming settings and fault codes.A text number for direct assistance from the custom Crafter.Assembly requires lots of technical skill to include machine work. Note: Check the photos in this listing. See the red lathe. If your lathe has holes instead of the normal slots, this motor will not fit without your ability to slot the cast iron lathe bed. Additionally we will not accept returns for this reason.You will have to cut the die-cast gear housing to allow additional room for the larger timing belt. (see photos) this can be done with a hacksaw and a file but a pneumatic cut off tool or die grinder will ease this job.You will have to press out the spindle shaft and cut a longer key way slot.You will have to completely disassemble the lathe and machine the slots in the bed. A spreader wrench is a big help but this can be managed with a hammer and punch.You will need metric and domestic allen wrenches + a 13mm/1/2" deep socket and ratchet.Some longer allen head metric allen head bolts (not included) may also be required, especially it you over tighten and strip the factory bolts provided with your machine.Notes:This system has so much more power that it becomes tempting to see just how much you can cut in a single pass. Do not do this because the rest of the mini lathe is not built strong/stable enough for this kind of abuse. If you jam it, you may damage the lathe to include broken cutters, parts and the control unit.This is abuse and no refunds will be issued for damage caused by abuse.All lathes are dangerous, increasing the horsepower increases this danger. It is your responsibility to insure fit and proper application. We make no guarantee of safety, application or that this product is suitable for your intended use.Our liability is limited to the purchase price of this item.Recent Feedback: If you have a mini lathe this is the best upgrade for the money by far.Great Kit A+.I love it great product and support.Mini Metal Lathe 1 HP Servo Motor 115 V 750 Watt Kit Fits Original Location Gear. Awesome product, crazy power output, thanks!took me about an hour to install I still have to make a mount for the controller. what a amazing enhancement to my lathe. Dan is a stand-up man, he had it shipped out to me ASAP I had it in 3 days. the power is incredible. thank you very much for your time invested with developing a product for a very fair price that is an amazing enhancement.Shipping: Due to weight it is best to ship USPS priority large flat rate box and to USA only. $5.50 shipping insurance will be added to the order. Returns: No Returns! Experimental item. Warranty:Limited 60 to 90 day parts warranty. Labor is buyers responsibility: See details, what's covered and for how long etc below. Shipping both ways for all parts returned for warranty is the buyers responsibility. Parts returned will be inspected for unique identification mark and or abuse. If found to be abuse or missing the identity mark, no warranty exchange part will be provided and buyer will be required to pay shipping to get their parts back. Warranty exchange parts may or may not be new but instead refurbished or demos that I have from previous builds. Warranty exchange can take up to 60 days as some parts may not be in stock and require ordering from overseas. Warranty starts on the day eBay records the system as paid and not the date the item is actually received.Servo Motor. - I will exchange a defective servo motor for up to 90 days. Buyer must return the motor + the control unit + the speed control switch for inspection and testing. Additionally original packaging such as Styrofoam package inserts must be used to return these parts. Computer control unit. - I will exchange a defective control unit PCB for up to 60 days. Buyer must return the motor + the control unit + the speed control switch for inspection and testing. Additionally original packaging such as Styrofoam package inserts must be used to return these parts. Note: Cutting too much material will result in a jam. This may damage the main board. This is abuse and it is not warranty. This damage is obvious. If you return a control unit and are honest about jamming it, we will fix it for you one time for a flat fee of $35 including shipping it back to you. You pay to ship it to us. Timing pulleys, motor mount and aluminum adapters. - I will exchange or replace these items at no cost or limited cost to buyer as follows. Buyer will be asked to provide photos. If photos are accepted seller will ship replacement parts at no cost to buyer. If photos are not accepted seller will ask buyer to return parts at buyers expense for inspection before seller warranties these parts. Timing belt and small parts are not covered. Customer alterations and machine work are not covered and may void the above warranty. Up to one year extended customer support: Print and keep your receipt, it could save you money.. We keep all parts in stock. That means if you brake it, we can fix it within days, not months to years waiting for parts from the large US sellers. Honesty goes a long way. If you smoked it just say so. We will ask a few questions and then sell you the correct replacement parts. Optionally we will ask you to return the control unit for repair and repair it for you at $45 plus shipping.Ask questions before ordering:Do not worry about missing this item. I am in the process of building several more. Also as I build them, they are improved as I never cut corners to save penny's.
Price: 329 USD
Location: Haines City, Florida
End Time: 2024-11-17T13:45:46.000Z
Shipping Cost: 28 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Return policy details:
Minimum Spindle Speed: 187 rpm
Phase: One Phase
Machine Type: Mini Metal Lathe
Power Source: Home electric outlets
Battery Included: No
Maximum Spindle Speed: 2,056
MPN: Does Not Apply
Suitable For: Aluminum, Brass, Cast Iron, Iron, Metal, Plastic, Stainless Steel, Steel
Brand: The Custom Crafter
Model Year: 2023
Type: Lathes
Control: Programmable Speed Control, Manual
Manufacturer Warranty: See description.
Voltage: 110 V, 115, V 120 V
Model: Prototype 7
