VALVE COVER SPACERS 1/2" Chrysler Mopar 426 Hemi (1964-1965 K Head) Style

Description: Dodge Chrysler Plymouth 426 Hemi 1964-1965 K Head Style VALVE COVER SPACERS1/2 INCH THICK 6061 BILLET ALUMINUM WITH GASKETLOK FEATUREINCLUDES STAINLESS STEEL BOLTS AND WASHERS.1/2" Spark Plug Tube Extensions Not Included but can be Bought from Indy Cylinder Head Inc. SOLD IN SETS (TWO SPACERS).Made in the U.S.A. from 100% U.S.A. Billet Aluminum.Some Information about us.We are a Manufacture of Billet Valve Cover Spacers and Adaptors.All of our Spacers and Adaptors are Made in USA with USA Made Materials. With Medice Manufacturing Valve Cover Spacers you no longer have to use tall valve covers to clear enhanced-performance valve train components.Utilize your factory valve cover (or any valve cover) and gain space for high performance valve train parts/components.We also manufacture valve cover adaptors / conversion kits to put different valve covers on different engines.Our GASKETLOK feature incorporates a relief cut in critical areas. This addition process causes the gasket material to become imbedded into the spacer providing a tighter grip of the gasket against the spacer surface. GASKETLOK is compatible will all premium gaskets on the market. The result is a better seal with greater gripping action to keep the gasket in place. Some information about installing our valve cover spacers. IF you are using an aftermarket aluminum head with a good, machined valve cover surface many people (including myself) just silicone the spacer to the head.IF you are using a cast aluminum valve cover & it is good, flat & straight in the gasket surface then just use Silicone (form-a-gasket) between the spacer & valve cover.IF your Head is as cast and rough, we recommend using a gasket between the spacer and the head.IF you are using a tin valve cover (once again MUST be flat) I recommend a gasket between spacer & valve cover.MOST IMPORANT everything MUST be clean & MUST use a good quality gasket.The BEST silicone I have found is Ford Motorcraft RTV for use on 7.3 Power Stroke Diesel Engines. Motorcraft Part number (TA31). You can get it at your local Ford Dealer.We also enclose an information sheet with each set of spacers sold.

Price: 325 USD

Location: Cochranton, Pennsylvania

End Time: 2024-09-25T15:32:30.000Z

Shipping Cost: N/A USD