Description: NC-559-V3-TF no-clean universal SMT tacky flux with UV (ROL0) 30g syringe kit LAST ONES EVER!!! Not yet expired, get them while they last!! STIRRI 30cc 30g Syringe kit Needle and Plunger included Ready to use Halogen free Tacky Flux Syringe Lead-free Soldering Materials Pcb Bga No Clean (NC) Consisting of rosin, solvent, and a small amount of activator, NC flux has low activity and is suited to easily soldered surfaces. NC residue is clear, hard, noncorrosive, non-conductive, and designed to be left on your assembly. Residue may be removed with an appropriate solvent. You guys wanted the real deal well here we are. This is there Newest Flux line. Next generation REACH-compliantuniversal no-cleanROL0 tacky flux -Industrial-gradewetting capabilities. - Excellent ability to hold components in place. -Clear residue does not turn brown under high-heat. - Not-corrosive. No-clean - can be left onPCB. - Slow burning ratio -long lasting. - Optical UV-tracer exposing unactivated residue. - Pleasant non-chemical scent. - Environmentally/health friendly. -V3 is the most recent no-clean formulation combining the power of559-series into a single universal REACH-compliantchemicalmaterial with optical UV-tracer and pleasant non-chemical scent. Makes soldering incredibly easy and fun without harming the environment or human health. - Mighty desoldering - implements upgraded copper ions booster, visually noticeable while wicking the workspace. Instant action - quickly wets lead-free or leaded alloys aiding in delivery of perfect joints. Excellent tackiness - holds components in-place yet allows for an easy repositioning. Suitable a for multi-step assembly - get back to a project later, the flux will flow again without losing performance. - Long lasting and economical - usesmodernized fire-retardant process preventing the flux from burning away too fast. Optimal viscosity - 38-51 (Malcom @ 10 RPM/25C (x103mPa/s)) - suitable for industrial machinedplacement as well as handcraft repairs and hobby use. Halide-free (<0.05%). Surface insulation resistant. No copper mirror breakthrough. Low electrochemical migration (<1 decade drop). - Clear residue can be easily removed with hot air, foam swab and basic Solvents, Status: 2023. ROL0 classification - non-corrosive, doesn't short components, can be left on board for multiple SMT assemblies (manufacturer recommends cleaning all flux residues at all times to avoid board contamination or voltage leakage on circuits with high impedance, also non-activated residue may absorb moisture from air and subsequently cause corrosion). - Industrial air-syringe intended for professional use with pneumatic dispensers, do not remove the piston stopper! Do not discard original nozzle cap, tighten the cap while not using the flux - flux may dry out upon extended contact with air. Does not include any dispensing components like plunger or tip which can be necessary to manually control the flow. Keep in a room temperature - do not refrigerate. Cleaning No-clean indicates cleaning method as defined by IPC standard and does not mean that the flux leaves no residue. No-clean rather means that the flux can be left on PCB for several consecutive SMT assembliesbut also wont cause corrosion if left indefinitely.However, cleaning can be necessary and it is desirable. No-clean fluxes are easily removed using Solvents, Status: 2023 in ultrasonic devices or using commercially available flux residue removers. Storage and Handling Tacky flux should be stored at room temperature (20-25C). Refrigeration is not necessary and will not extend product shelf life. If the material has been refrigerated - consider 3-4 hoursat room temperature to fully normalize. Syringes and cartridges are best stored vertically with tip pointing down. Properly stored tacky flux has up to 24-month shelf life. Safety Notice This product is designed for a professional audience. The information contained herein is based on technical data that we believe to be reliable and is intended for use by persons having relevant skills at their own risk. Consumers should make their own tests to determine the suitability of each product for their particular process and take safety measures. Manufacturer/resellers assume no liability for results obtained or damages incurred through the application of the data presented. Dispensing Kit (Plunger and Tip) Airsyringes are intended for industrial dispensing machines using a piston stopper instead of a plunger - Dispensing Kit is a third party add-onnecessary tomanually controlling the flow.Dispensing tip gauge (size)is 14-18 Ga and may differ from pictured. A plunger is to push on the piston and not necessary snuggly fittingair syringe, a plunger can be loose. Do not remove the piston as it delivers the best seal preventing contact with air. Compliance This material is certified REACH-compliant - does not use any raw materials from the REACH restricted list of substances of high concern.
Price: 19.99 USD
Location: Las Vegas, Nevada
End Time: 2024-08-28T23:22:56.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: STIRRI
Flux Form: Paste
Model: No Clean
Container Type: Tube
MPN: Does Not Apply
Flux Type: Rosin Paste Flux
