Description: Shars 8 x 8" Lockdown CNC Milling Machine Vise w/Base + Certificate New USE ON NC/CNC MACHINES FOR CUSTOMER WHO ONLY NEEDS ONE VISE NOT TWO OR MORE, BECAUSE OF BED HEIGHT TOLERANCE , THESE VISES CAN'T BE USED TOGETHER.Comes with certificate Product Code 202-1003A Product description Dimensions Jaw Width: 8" Jaw Opening: 8.4" Jaw Height: 2"Weight: 180 Lbs Accurate to 0.002” per 4” on squareness and 0.006” per 4” on parallelism without base and 0.008” per 4” on parallelism with baseVise Key: 15.875mm table slot width, 18.00mm base widthProduct featuresEach pound of force in horizontal induces 1/2 lb of downward force, eliminating jaw tilt. This Vise is so designed that the horizontal force generated by tightening the handle pushes the semi-sphere within the movable jaw and thus thrusts the movable jaw downward. The workplace does not move up, even if it is held at the top of the jaw plates. Highest clamping power. It's very accurate and durableSliding surface of the vise bed is flame hardened and groundVise bed is made from grey cast iron and the maximum tensile strength of the vise bed is 28,000 PSIWith anti-jaw lifting mechanism. K type angle lock nut is made from the highest quality ductile Iron, firm and durableAcme screws and easy to read 0-360 deg scales4 screws from the top through the jaw reduce key's side force and make the vise body not easy to broke, extend vise life. Taiwan new typeThe installation size of Soft Jaw is the same as Kurt. 8" Aluminum Soft Jaws which are made in USA can be mounted into this viseFour setting positions of the jaw plates are available, widening the jaw plates opening. Four ways to use the vise, shows on the following fig. Product includes Swivel baseProduct application Jaw Plate Bolt Hole Spacing: 4.75'' If the T-slot size of your milling machine table is 5/8 "(0.625"), the square nuts come with the base Width = 0.7", the customer need machine the width to 0.625", then, it could fit tightly in your milling machine with 5/8" T-slot. According to the table, when A and C are unequal to E, you can swivel the vise base to suitable angle, then the vise can be installed onto the Mill.We have other vises available at My Ebay Store:SHARS 4" 440V Milling Vise +/-0.0004 4" wide jaw plate, 4" inner jaw opening, 10" outer jaw openingMade from 80,000PSI stress relief cast ironVise bed hardened to 45 HRc and jaw plate hardened to 54 HRcBed height Tolerance 2.25" +/-0.0005"Clamping repeatability +/-0.0004"Lifetime limited warrantyTo learn more, click here to 202-0991SHARS 6" 690V Milling Vise +/-0.0004 6" wide jaw plate, 8.95" inner jaw opening, 17" outer jaw openingMade from 80,000PSI stress relief cast ironVise bed hardened to 45 HRc and jaw plate hardened to 54 HRcBed height Tolerance 2.875" +/-0.0005"Clamping repeatability +/-0.0004"Lifetime limited warrantyTo learn more, click here to 202-0994SHARS 6" 660U Milling Vise +/-0.0004 6" wide jaw plate, 6.25" inner jaw opening, 15" outer jaw openingSingle piece of stationary jaw and vise body to enhance clamping rigidness and accuracyMade from 80,000PSI stress relief cast ironVise bed hardened to 45 HRc and jaw plate hardened to 54 HRcBed height Tolerance 3.189" +/-0.0005"Clamping repeatability +/-0.0004"Lifetime limited warrantyTo learn more, click here to 202-0995SHARS 6" 600DS Double Station Milling Vise +/-0.0002 6" wide jaw plate4.9" jaw opening in double station, 12" jaw opening in single station (conversion kit included)Unique leadscrew design to allow to clamp either same sized or dissimilar sized partsJaw lift prevention mechanism by eccentric pin designMade from 80,000PSI stress relief cast ironVise bed hardened to 45 HRc and jaw plate hardened to 54 HRcBed height Tolerance 3.25" +/-0.0005" (matched bed height at no additional cost)Clamping repeatability +/-0.0002"Lifetime limited warrantyTo learn more, click here to 202-0999 All Available to Ship NOW! at Fixed Prices SHIPPING: UPS GroundBuyer pays ACTUAL UPS shipping & insurance, and a $3.00 handling fee for this item to be shipped to all states within the continental United States. Hawaii, Alaska & and other United States Territories will ship via UPS BLUE. Canada will pay actual shipping costs plus duty fees via UPS. We can combine other auctions or store items to save on shipping. You may ask for freight cost before buying tools. Shipment will be made the same day as your payment is received and an UPS tracking number will be email to you. If your order is being shipped to an address outside of the United States, local consumer tax and/or customs duty , brokerage charges may apply and the package's recipient may need to pay these to clear customs. If you need to speak to a sales person feel free to call. We are open Monday through Friday 8:30 to 5:00 central. Phone: 1-630-443-3244 Email: discountmachineshop@gmail.com PAYMENT: We accept VISA, Master, Discover, American Express and E-Check on PayPal.com Illinois resident adds 8% sales tax. RETURNS: If the item stated as brand new is found defective on arrival or incorrect item was shipped, buyer understands that the product will be repaired or replaced at seller's discretion, and be given a reasonable amount of time. Buyer is responsible for return shipping costs and insurance. Warranties are offered by the manufacturer and will be honored by the manufacturer. All shipping and handling fees will not be returned in any case. Any questions regarding our tools, feel free to email us at discountmachineshop@gmail.com
Price: 228.95 USD
Location: Saint Charles, Illinois
End Time: 2024-01-01T22:04:04.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
MPN: 202-1003A
California Prop 65 Warning: WARNING: This product can expose you to chemicals including nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm.