SeaStar HS5157 Hydraulic Seal Kit HC5345 HC5340 HC5341 HC5342 HC5343 HC5344

Description: SeaStar HS5157 Hydraulic Seal Kit HC5345 HC5340 HC5341 HC5342 HC5343 HC5344 1. PPLICATION Fits for Seastar pivot / front mount hydraulic steering cylinders on outboard motors, most outboard boats with single or twin engines 2. MATERIAL Precision CNC machined from high quality Aluminum, steel and rubber to ensure high hardness, wear resistance and corrosion resistance 3. COMPATIBILITY Used to repair leaking or weeping cylinder seals. Fits front mount cylinder parts HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754, HC6755 4. NOTICE Inspect the steering rod itself just making sure there is no severe pitting in the rod or anything that would indicate premature failure of new set of seals. Severely pitted rods will rid up a new set of seals and cause premature failure of the expensive seal job 5. HS5157 Kit Includes 2 x Seal Glands 1 x Seal Gland Assembly Guide Tool 1 x Pin Wrench 6. Satisfaction Guarantee We aims to provide you the best products and services. We support 60 days returns and 12 months warranty. Please feel free to contact us if you have any question. Sunluway Front Mount Hydraulic Steering Cylinder Seal Kit is Great for Use in Marine Applications! It is critical for you to check the cylinder rod to see whether it has scratches, nicks or damages in anyway. Any damages found, the complete cylinder must be replaced. Failure to replace a damaged steering cylinder will result in seal failure and possible loss of steering. Do not remove shaft from steering cylinder. Bleeding the system to remove any air, compatible with Seastar Hydraulic Oil HA5340 only. Check for smooth operations and full travel of the cylinder. Check for no leaking. Compatibility: Fits front mount cylinder parts: HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754, HC6755 Model Reference: Seal Kit for HC5345, HC5340 and HC5342 (threaded end gland), HC5347 (Pivot Cylinder, Honda 115-130 specific), HC5348 (Pivot Cylinder, OMC 77-90 specific), HC5365 (Compact Cylinder (threaded end gland)) and HC5394 (SeaRay Compact Cylinder (obsolete) (threaded gland)) Note: The smallest imperfection on the shiny steering rod will cause a new seal to fail real quick. Remove the internal steering rod and then take some 1500 then 2000 grit wet sand paper and go over the full length of the steering rod (take your time!!). Clean rod up, lube it with hydro fluid and carefully reassemble the steering system. Package Content: Seal Glands Seal Gland Assembly Guide Tool & O rings Pin Wrench 1. S&H will be determined based upon the SHIP TO address. 2. Please list your special requests (color, packages, etc.) in the PAYPAL NOTES SECTION when you make payment. Orders will be ship out within 1-3 business days after payment has cleared. Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours. Please allow 10-30 days for international deliveries. Some shipments could take longer subject to your local customs authorities. United states 2-8(days) Return & Warranty: We aims to provide you the best products and services. We support 60 days returns and 12 months warranty. Please feel free to contact us if you have any question. About reply: If you have any questions, please feel free to email our service specialists 24 Hours a Day, 7 Days a Week, and we will reply you ASAP. If no response within 48 Hours, please check the spam of mail box or kindly re-send it to us. If you meet any problem after receiving our product, please feel free to contact us. We will try our best to solve your problem. Please contact us before leaving Neutral or Negative feedback if you are not satisfied our service or products. Good communication is helpful for both of us to resolve any problems and issues. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers. Due to the long transit time, the items may be damaged during transportation. If the items are damaged, please contact us before leaving the feedback. Negative or Neutral feedback does not resolve any underlying issues that you may be experiencing as a buyer.Any question or unsatisfaction please contact us with ebay message,we will sincerely solve for you. If you are satisfied with our service, please leave us positive 5-Detailed Selling Rating (DSR). Thanks! 1. PPLICATION Fits for Seastar pivot / front mount hydraulic steering cylinders on outboard motors, most outboard boats with single or twin engines 2. MATERIAL Precision CNC machined from high quality Aluminum, steel and rubber to ensure high hardness, wear resistance and corrosion resistance 3. COMPATIBILITY Used to repair leaking or weeping cylinder seals. Fits front mount cylinder parts HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754, HC6755 4. NOTICE Inspect the steering rod itself just making sure there is no severe pitting in the rod or anything that would indicate premature failure of new set of seals. Severely pitted rods will rid up a new set of seals and cause premature failure of the expensive seal job 5. HS5157 Kit Includes 2 x Seal Glands 1 x Seal Gland Assembly Guide Tool 1 x Pin Wrench 6. Satisfaction Guarantee We aims to provide you the best products and services. We support 60 days returns and 12 months warranty. Please feel free to contact us if you have any question. Sunluway Front Mount Hydraulic Steering Cylinder Seal Kit is Great for Use in Marine Applications! It is critical for you to check the cylinder rod to see whether it has scratches, nicks or damages in anyway. Any damages found, the complete cylinder must be replaced. Failure to replace a damaged steering cylinder will result in seal failure and possible loss of steering. Do not remove shaft from steering cylinder. Bleeding the system to remove any air, compatible with Seastar Hydraulic Oil HA5340 only. Check for smooth operations and full travel of the cylinder. Check for no leaking. Compatibility: Fits front mount cylinder parts: HC5340, HC5341, HC5342, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5358, HC5365, HC5375, HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754, HC6755 Model Reference: Seal Kit for HC5345, HC5340 and HC5342 (threaded end gland), HC5347 (Pivot Cylinder, Honda 115-130 specific), HC5348 (Pivot Cylinder, OMC 77-90 specific), HC5365 (Compact Cylinder (threaded end gland)) and HC5394 (SeaRay Compact Cylinder (obsolete) (threaded gland)) Note: The smallest imperfection on the shiny steering rod will cause a new seal to fail real quick. Remove the internal steering rod and then take some 1500 then 2000 grit wet sand paper and go over the full length of the steering rod (take your time!!). Clean rod up, lube it with hydro fluid and carefully reassemble the steering system. Package Content: Seal Glands Seal Gland Assembly Guide Tool & O rings Pin Wrench

Price: 30.99 USD

Location: Rancho Cucamonga, California

End Time: 2024-02-24T21:06:33.000Z

Shipping Cost: 0 USD