Royer R10 Ribbon Microphone

Description: The Royer R-10 Ribbon Microphone was designed to be used in the studio and onstage. Built by hand in Royer’s Burbank, California, factory, this passive mono ribbon mic can handle SPLs of up to 160 dB at 1 kHz. Its compact size and mounting system also allows for flexible, unobtrusive positioning. 2.5-Micron Aluminum Ribbon Element The Royer R-10 Ribbon Microphone has a 2.5-micron aluminum ribbon element, which is formed via Royer’s direct-corrugation process. It’s shielded by a 3-layer windscreen system, which provides superior protection from air blasts and plosives. The built-in windscreen also greatly reduces proximity effect, which is when bass builds up from close miking, so that guitar cabinets and acoustic instruments can be miked close-up with less of the bass buildup. In addition, the Royer R-10’s internally shock-mounted ribbon transducer isolates the ribbon element from shocks and vibrations. This isolation increases the microphone’s durability. David Royer Custom-Designed Transformer The Royer R-10 Ribbon Microphone also features a David Royer custom-designed transformer for high overload threshold. This minimizes saturation at even very high sound pressure levels. Top-of-the-Line Sound This ribbon microphone captures all the low end, midrange warmth and punch that guitarists and engineers have come to expect from a Royer. Royer ribbon mics are iconic partners for electric guitars, and the R-10 works its best on studio and live electrics. The Royer R-10 can also expertly handle brass instruments, drums, violins, ukuleles, steel-stringed and nylon-stringed acoustic guitars and banjos, and other stringed instruments. Vocals also record warm and naturally on an R-10, with the EQ-friendliness allowing for dialing in completely different sounds. FeaturesExcellent studio and live micHigh SPL handlingDave Royer custom designed transformer2.5-micron R-series ribbon element3-layer windscreen systemAcclaimed Royer ribbon soundHand-built in Burbank California Specs Audio Element: Ribbon Frequency response: 30 Hz - 15 kHz Max SPL: 135 dB Connector: XLR Pattern and Type Capsule: Ribbon Polar pattern: Figure-8 Type: Mounted Phantom power required: No Size and Weight Diameter: 35mm. / 1.4 in. Length: 149 mm. / 5.8 in. Weight: 13 oz. / 0.8 lbs. Included Accessories Case: Protective Case Clip: Yes Shockmount: Yes Pop filter No Power supply: No Cable: No Stand: No

Price: 505 USD

Location: Seattle, Washington

End Time: 2024-11-26T09:35:18.000Z

Shipping Cost: N/A USD