PLUTO+ 70MHz-6GHz SDR Transceiver SDR Radio for Gigabit Ethernet Micro SD Card

Description: Description PLUTO+ 70MHz-6GHz SDR Transceiver SDR Radio with 4 Antennas for Gigabit Ethernet Micro SD Card Product Overview: PLUTO+ is a software-defined radio platform that supports 2TX and 2RX, supports Gigabit Ethernet and Micro SD card. It refers to the design for well-known ADI ADALM-PLUTO and improves its shortcomings. Features: - ADC/DAC: AD9363 (Can hack to AD9361 or AD9364) - 2 Transmit, 2 Receiving channel - RF Range: 70MHZ~6GHZ - Ref Clock: VCTCXO 40MHZ 0.5ppm - SOC: for Zynq7010 FPGA: 28k - RAM: 512M - FLASH: 32M - USB: 2.0, support OTG - Ethernet: 1000Mb - Micro SD can use to boot - DC IN: 5V±0.5V-2A microUSB Interfaces: Please note that all IO levels are 1.8V. 3.1 When using the official firmware for ADI-PlutoSDR, please connect to URST-MI052. 3.2 When using Pluto+ firmware and need to support Ethernet, please connect URST-MIO46 3.3 When using SD card to boot, please connect SD-H to 1V8 3.4 When using JTAG to debug, please connect JTAG# to GND 3.5 Please connect EXCLK to GND when using external reference clock input PTT Key Port: - PTT drives optocouplers through GPIO0 (MI00), which requires an external relay or control circuit. DFU KEY: - At any time, you can press the DFU button and power on PLUTO+ again to enter the DFU mode, but you need to connect the URST jumper to MI052. Ref CLK input IPEX: - You can connect a cable to input an external high-precision reference clock for AD9363 through the IPEX interface. - The main level should not exceed 3.3V, and the EXCLK jumper needs to be connected to GND to turn off the built-in clock Calibrate the Frequency of Built-in VCTCXO: - The frequency of the 40M clock can be fine-tuned by adjusting the adjustable resistor next to the VCTCXO, provided that you have a reference signal source. Micro-SD: Support booting via SD card, need to connect SD-H jumper to 1V8. Package Included: - 1 x PLUTO+ SDR radio - 1 x USB cable - 1 x 8dBi 2.4GHz/5GHz/5.8GHz antenna - 1 x 5dBi 40MHz-860MHz antenna - 1 x 40MHz-6GHz telescopic antenna - 1 x 12dBi 700MHz-2700MHz antenna Note: - It is assembled and ready to use. - SD card is not included in the package. Packaging Details: - G.W.: 1kg Screenshot of Software: Payment Terms 1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc. 2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.Shipping Terms 1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email. 2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.Return Terms If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.Custom Duties & Taxes 1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers. 2. Please check with your country's customs office and inform us what/how much should declare before shipping.Feedback 1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap. 2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.On Jul 16, 2024 at 02:45:14 PDT, seller added the following information:

Price: 246.05 USD

Location: Shenzhen

End Time: 2024-10-16T06:17:44.000Z

Shipping Cost: 0 USD