Outback Power FW-MB3-S FLEXware MATE3 Surface Mounting Bracket

Description: Outback Power FW-MB3-S FLEXware MATE3 Surface Mounting Bracket Outback Power FLEXware MATE3 Surface Mounting Bracket FW-MB3-S The MATE3 Mounting Bracket is for surface mounting or wall mounting of the MATE3. The surface-mount bracket allows enough space behind the MATE3 that the CAT5 cable can be brought directly into the MATE3 without routing the cable through a wall. In addition, the bracket can be attached to an existing mounting plate, such as the OutBack FLEXPower ONE assembly. This is usually only done when a bracket is being replaced. NOTE: The cable can be routed into the back of the mounting bracket through an opening in the wall or surface. This cabling method can be used if the cable must be concealed inside a wall or brought from one room to another. Includes mounting screws and bushing Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier - USAUP TO 50% DISCOUNTSTOP BRANDSPaymentShippingReturnsPaymentShippingReturns We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement. If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. See our other itemsThank you for visiting our Ebay store!Outback Power FLEXware MATE3 Surface Mounting Bracket FW-MB3-S The MATE3 Mounting Bracket is for surface mounting or wall mounting of the MATE3. The surface-mount bracket allows enough space behind the MATE3 that the CAT5 cable can be brought directly into the MATE3 without routing the cable through a wall. In addition, the bracket can be attached to an existing mounting plate, such as the OutBack FLEXPower ONE assembly. This is usually only done when a bracket is being replaced. NOTE: The cable can be routed into the back of the mounting bracket through an opening in the wall or surface. This cabling method can be used if the cable must be concealed inside a wall or brought from one room to another. Includes mounting screws and bushing Outback Power FW-MB3-S FLEXware MATE3 Surface Mounting Bracket Outback Power FLEXware MATE3 Surface Mounting Bracket FW-MB3-S The MATE3 Mounting Bracket is for surface mounting or wall mounting of the MATE3. The surface-mount bracket allows enough space behind the MATE3 that the CAT5 cable can be brought directly into the MATE3 without routing the cable through a wall. In addition, the bracket can be attached to an existing mounting plate, such as the OutBack FLEXPower ONE assembly. This is usually only done when a bracket is being replaced. NOTE: The cable can be routed into the back of the mounting bracket through an opening in the wall or surface. This cabling method can be used if the cable must be concealed inside a wall or brought from one room to another. Includes mounting screws and bushing Hurricane Wind Power 2019Corporate America Today2019 Best Off-Grid Renewable Energy Product Supplier - USAUP TO 50% DISCOUNTSTOP BRANDSSee our other itemsPayment We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping We offer Fast shipping on all orders! Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class). In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.Returns If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not. You can return a product for up to 14 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Thank you for visiting our Ebay store! Outback Power FLEXware MATE3 Surface Mounting Bracket FW-MB3-S The MATE3 Mounting Bracket is for surface mounting or wall mounting of the MATE3. The surface-mount bracket allows enough space behind the MATE3 that the CAT5 cable can be brought directly into the MATE3 without routing the cable through a wall. In addition, the bracket can be attached to an existing mounting plate, such as the OutBack FLEXPower ONE assembly. This is usually only done when a bracket is being replaced. NOTE: The cable can be routed into the back of the mounting bracket through an opening in the wall or surface. This cabling method can be used if the cable must be concealed inside a wall or brought from one room to another. Includes mounting screws and bushing

Price: 59.99 USD

Location: Roanoke, Virginia

End Time: 2023-12-03T21:07:24.000Z

Shipping Cost: N/A USD