ORTUR Laser Master 2 S2 LU2-2,24V Laser Engraver,DIY Laser Engraving Machine,

Description: Ultra-Fine Compression: Ortur Laser Engraver has 32-bit professional motherboard, which is smarter, faster, more accurate and easier to use. The laser engraving output power is 1W-1.6W, engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.07*0.06mm, The engraving machine speed can be as high as 5000 mm/min. Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, when the engraving machine is displaced or tilted, it will automatically stop the laser; 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically. New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly protect your eyes to reduce the cost of your goggles and the inconvenience of wearing goggles. Extensive Compatibility & Uses: Ortur laser engraver and cutter can engraving cylinders by add to rotary rollers. Unleash your creativity on over one hundred materials including paper, bamboo, wood, leather PCB board, aluminum oxide, glass, etc.compatible with various mature engraving software, such as LaserGRBL(Free), LightBurn(Paid). The ORTUR laser cutter supports Win 7 / Win 8 / XP / Win 10 / Win 11, and also support MacOS and Linux system. Quality and Assurance: The entire engraving machine adopts a modular design, which is convenient for users to assemble, repair, and replace and update machine parts. We are the manufacturer of ORTUR. We only provide Amazon customers with the best quality and comprehensive pre-sales and after-sales services. The engraving machine enjoys a one-year warranty. If the engraving machine fails during the warranty period, please contact us. UPGRADE 1.8 FIRMWARE Ortur Laser 1.8 Series Firmware has been optimized for faster speed engraving. Taking advantage of the faster ESP32 McU. 1. The main frequency is as high as 240MHZ. 2. The working efficiency is high, and the machine moves fast. 3. With current and voltage detection functions, better protection of the machine. 4. Active power-off function, which can actively disconnect the power supply in the case of abnormal power supply. 5. Support LU3 series digital Laser module, it could adjust the laser heat dissipation time after the engraving is completed according to the use of the digital laser module. 6. The use of efficient real-time operating system Freertos system is more stable and more efficient. NOTE: 1. When the laser engraver is working, the operator should not leave it alone, just in case the materials being carved catch fire. 2. Do NOT operate a laser without eye protection (Laser goggles). 3. Please set up a laser engraver in the fireproofing area, with good ventilation. 4. Please keep minors (especially kids younger than 14 years old) away from this laser engraver. Minors of any age should not use this laser without direct Adult supervision and proper eye protection. 5. Please avoid strong impact on the machine. 6. Please do not touch the laser beam with your hands or any other objects you do not wish to engrave/burn/cut. Serious physical harm is possible if used improperly. 7. Please do not touch the heat sink, when the laser engraver just stops working, it may scald your hands. 8. Use the laser engraver in a room that can be closed by a door and ensure that neither laser beams nor stray light can penetrate through the windows. 9. While using the laser engraver, use door signs or a warning light on the door that indicates the laser engraver is in operation.

Price: 159.99 USD

Location: 41048

End Time: 2024-08-22T06:22:01.000Z

Shipping Cost: 20 USD