Description: Product Description Features:*Connect the programmable NanoHat for OLED to the NanoPi NEO and run the for Nano Hotspot module with Ubuntu and other useful s. The driver source codes and a user-friendly shell interface are included to check information and status.*The NanoPi Neo is another fun board from FriendlyARM for hobbyists, hobbyists and fans. CPU: Allwinner H3, Quad-Core Cortex-A7 up to 1.2GHz DDR3 for RAM: 512MB With portable size 40x40mm, 16GB pre-installed for SD card with Friendlycore (based on Ubuntu 16.04 and Kerenl 4.14); Transceiver IC: ADF7021, programmable output power: -16dBm to +10dBm.*NanoHat for OLED is a small and cute monochrome for OLED module with low power consumption and 433 MHz earthenware antenna. It is a 0.96-inch display with a resolution of 128 x 64. It communicates with a master device via I2C. The NanoHat for OLED board has the same form factor as FriendlyElecs NanoPi NEO, which can be stacked on top of a NanoPi NEO in a for Nano Hotspot module.*Small but easy to start: charge for MMDVM for Nano Hotspot module with USB, connect to router, connect router to computer and open http://pi-star (win) or http://pi-star.local(MAC) to start. Log in with the username PI-Star and password himberry. Note: Make sure to use a qualified power supply 5V 2A. Non-compliant power supplies can cause bit error rate (BER) instability and overvoltage that can this NanoPi and HAT.*3D Aluminum Enclosure, Fan and Heat Sink： The for MMDVM for Nano Hotspot module comes with a custom 3D aluminum enclosure, internal fan and heat sink to ensure optimal performance and cooling. The case is sturdy and and protects the module from damage.Specifications:Part Name: for MMDVM Hotspot ModuleColor:BlackMaterial: AluminumSize：The actual product shall prevailPower supply: 5V 2AMCU: F103C8T6Transceiver IC: ADF7021Programmable Output: -16dBm to +10dBmTCXO: 14.7456MHz, ± 2.5ppmHost: NanoPi NEO 512M for RAM, v1.4,A 3 architectureOptions USB WiFi: RTL8188CUSReplaceable folding antenna, medium frequency 433 MHz.External USB Port：USB Wifi | RTLSDR | USB to Serial Connect Nextion 2.x-3.x TFT DisplaySDCard: 16GBModem Type: for MMDVM_HS_NPi Hat (VR2VYE) for Nano Pi (GPIO)Package Content:1PCS Host1PCS Antenna1PCS KableNote:1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.2. Please allow slight manual measurement deviation for the data.Payment Payment must be completed within 5 days. If you have any problems about payment, please contact us via message.Delivery details We only ship to confirmed Order addresses. Please comfirm that your Order address is in line with your shipping address. Please kindly note that the combined shipping is not provided because the shipping fee is calculated by weight. Also, the each additional item means exactly the the same color and size. It takes about 7-15 working days to US; about 10-30 working days to other countries. for TRANSIT time may be a little delayed because of the bad weather and customs inspection. If you do not receive your item within 30 working days since payment finished, please contact us immediately for further assistance. Contact us We strive for 100% customer satisfaction! Positive is very important to us. If you have any questions, please feel free to contact us via "Ask seller a question" . We will reply your email within 24 working hours.
Price: 78.5 USD
Location: jinhua
End Time: 2024-12-02T05:59:27.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: Unbranded
MPN: Does Not Apply
