MXR M239 Mini Iso-Brick Power Supply

Description: DJ GEAR INSTRUMENT GEAR LIVE SOUND RECORDING MICROPHONES HEADPHONES ACCESSORIES SOFTWARE LIGHTING BUNDLES Authorized Dealer MXR M239 Mini Iso-Brick Power Supply - Used Mini Power Supply - Used - Description The long story. The Mini Iso-Brick Power Supply supplies quiet, noise-free DC power to wide range of pedal types while taking up less space than a candy bar. Whether you need a space-saving solution for your downsized travel board or you just need to power a small, carefully curated selection of tried-and-true staples, this little box has what you need. First, let’s talk outputs. The Mini Iso-Brick Power Supply has five, and each is fully isolated to eliminate obnoxious, gig-ending ground loop noise. Four of the outputs supply 9 volts of power at 300mA, while a fifth can be set to provide either 9 volts or 18 volts at 800mA depending on your needs. With a generous amount of current on tap and the ability to handle both negative and positive grounds, these outputs will accommodate almost any pedal, analog or digital. And don’t let the five outputs restrict you—if you need to add an extra pedal, the Mini Iso-Brick Power Supply has you covered. It comes with a splitter cable that can be used to connect two pedals to a single output, provided they require the same voltage and you don’t exceed the output’s current rating. You can do this with all of the outputs simultaneously—just purchase the extra cables to do so. Finally, troubleshooting can be a hassle on dark stages, so the Mini Iso-Brick Power Supply comes equipped with LEDs to let you know that all your connections are solid. Combine that with a lightweight housing that's built like a tank, and you can step on stage with confidence that your pedalboard will stay powered from gig to gig. The Mini Iso-Brick Power Supply supplies quiet, noise-free DC power to wide range of pedal types while taking up less space than a candy bar. Each of its 5 outputs is fully isolated, eliminating gig-ending ground loop noise. Whether analog or digital, positive or negative ground, this little power box has you covered. Power The Mini Iso-Brick Power Supply requires an 18V regulated power supply rated at 2000 mA, with 5.5mm x 2.1mm positive barrel, negative center plug. The included power adapter can utilize a wide range of wall power, from 100–240V at 47–63Hz. Comes with switchable US/Japan, UK, EU, and Australian plugs Operation Connect included AC adapter into M239’s 18V INPUT jack. Plug AC adapter into wall outlet; white INPUT LED indicates good connection. Connect up to four pedals requiring 9V power to the four 9V OUT jacks using the included barrel-to-barrel cables. Connect another pedal to the switchable 9V/18V output. Use 9V/18V slide switch to match pedal voltage (indicated by green LED). Splitter cable can be used to connect two pedals to a single output. Connect straight end to M239 output and rightangle ends to pedals’ power inputs. Whether connecting single pedal or multiple pedals via splitter cable, always be sure pedal mA ratings do not exceed output mA ratings. Troubleshooting The power LED fails to light. Dead AC outlet. Try plugging into another outlet, or test the outlet with another device like a lamp. Faulty connection. Double check plugs to make sure they are inserted securely. Short-circuited output. Disconnect the cable from the output whose blue LED is off. Wait 5 to 10 seconds for the unit to reset, indicated when the blue LED comes on. Power provided to some effects, but not others. Incompatible power plug. Check that the dimensions and polarity of the pedals are compatible with the provided cables. Faulty cord. Check by swapping the power cable with another known good cable. Faulty jack on Iso-Brick Power Supply DC output jack. Check by plugging the power cable into a different DC jack. Faulty jack on the pedal. Test by running the pedal off battery power. Features/Specs Cables use industry standard 5.5mm x 2.1mm positive barrel, negative center polarity plugs. Each output features a green LED. When lit, this LED indicates a good connection. If short-circuited or overloaded, this LED will turn off. M239’s four 9V outputs can handle up to 300mA each. M239’s 9V/18V output can handle up to 800mA. All outputs may be used simultaneously for a total power output of 17.1 watts. Combining Outputs: Any output may be combined with any other output when stacked in series. If combining outputs in parallel, only outputs of the same voltage may be used together. The M239’s foldback current limiting circuit (FBCL) provides ultimate protection against power shorts and overloads. Even at full load, the M239 operates coolly and quietly as a fully regulated power supply Input 18V At 2 Amps regulated supply (positive barrel negative center 5.5mm x 2.1mm plug) Outputs 9-18V @ 800mA (switched) (4) 9V @ 300 mA (all positive barrel negative center 5.5mm x 2.1mm) We are authorized dealers for all these brands. Click a logo to see our listings. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. If an item is refused by the buyer, ship costs to and from the destination in which the item was shipped to are not refunded. Please note the cost of return shipping is usually double of what the original ship cost. Shipping is not free to HI, AK, and PR. FREE SHIPPING ONLY TO THE LOWER 48 STATES. We provide free shipping to the contiguous 48 United States, on most items. Shipping fees to ALL OTHER LOCATIONS will be calculated individually and added to customer invoices. ProAudioStar is also not responsible for any taxes, local duties, or fees outside of the USA and those are not included in the sale price or ship charge. In the event that the customer refuses a shipment, all shipping costs to and from the country or State in which the item was shipped to are not refunded. Please note, in some cases return shipping can cost as much as double the original ship cost. We operate a 30-day return period. Items must be returned with all original packaging as well as all included items. Items that are not returned in original, resalable condition are subject to a 15% restocking fee. We charge a 15% restocking fee on returned items only if the item is clearly used and or the packaging is tarnished. A 10% re-stock is more likely if the unit comes back in mint condition. The ship cost we paid to ship your item will be deducted as well. In some cases restock fees and ship costs can be applied as a store credit. We will exchange a defective unit for the same unit within the 30-day period. After that period, you will have to work directly with the manufacturer for warranty service. Items that can not be returned include: software, units with contents or packaging that is damaged/missing, and items that are considered for personal use (such as earphones, headphones, microphones, instrument mouthpieces, harmonicas or other items that you wouldn't want to purchase if someone else had previously used them). Also, Items which we do not normally stock (i.e. "Special Orders", discontinued products, close-outs, used products, etc.) are non-returnable. We strongly suggest that you check your order after receiving it to be sure that it is in proper working order. Please contact us for a Return Authorization before returning any items.

Price: 82.99 USD

Location: Winchester, Virginia

End Time: 2024-11-28T19:35:24.000Z

Shipping Cost: 0 USD