MagCAD Garmin 1050 For Specialized Mount - Venge SL7 Tarmac Roubaix Diverge 1040

Description: Features:Garmin Edge 1050/1040 mount for the Specialized integrated stem mount system.Strong, durable mount that holds your Garmin device directly in front of your Specialized stem.Attaches to the new range of Specialized stems; Venge, Tarmac SL7, Tarmac SL8 and Future.Weighs just 17 grams without hardware.Please Note: The Garmin device and Specialized stem pictured are for reference only. What's Included1x 3D printed mount.1x M4x16mm cap screw.1x M4 retained nut.OverviewMount your Garmin Edge 1050 or 1040 computer in front of your Specialized handlebars with this MagCAD Mount. The new Specialized stems found on bikes such as the Venge, Roubaix, Tarmac and Diverge (as well as others) come with a slot in the centre that provides a secure point to attach the mount. This design has been subtly modified, now 7mm longer than the previous 1040 version, to suit the new Garmin Edge 1050. It remains compatible with all other Garmin Edge devices. Please note there is a shorter version of this mount designed for the smaller Garmin Edge devices. ApplicationFitting the MagCAD mount is a simple process.Remove your Specialized stem faceplate and insert the supplied retained nut in the back of the faceplate, holding it horizontally.Screw the MagCAD mount through the front of the faceplate, through the slot and into the retained nut. We recommend using a thread locking compound before installing the screw. Loosely tighten the screw.Reassemble the stem faceplate to your Specialized stem, carefully following the manufacturers instructions and ensure the retained nut and screw do not foul your handlebars.Pivot the mount to your preferred orientation and tighten to 2.7Nm.Periodically check the screw remains tight and secure.All Garmin Edge devices come with a lanyard for extra security. We recommend using this lanyard alongside our MagCAD mount to avoid any risk of damage due to incorrect assembly or mis-use. Compatible With:All Garmin Edge devices including the new Garmin Edge 1050.Specialized stems: Venge, Tarmac SL7, Tarmac SL8, Future.DisclaimerThis product and/or service is not affiliated with, endorsed by or in any way associated with Specialized Bicycle Components Inc, Garmin Ltd, or their products and services. Specialized, Garmin and their respective logos are trademarks or registered trademarks of Specialized Bicycle Components Inc and Garmin Ltd. MaterialMagCAD Mounts are 3D printed in Nylon PA12. However these are not your typical home 3D printers. Following a process of SLS (Selective Laser Sintering) on industrial size printers, costing anything above £100k, the resulting mounts have fantastic resolution and refinement. The surface finish is slightly rough with a matte effect and the performance of the mounts are comparable to injection moulded parts. CustomisationAs with all MagCAD items it's more than possible to tweak or change the design to suit your particular installation. Feel free to get in contact for more details. About MeI’m a MEng Aerospace Engineer and former professional cyclist. All the items, including this mount, are ones which I’ve developed and use myself. A hobby which I take too far but want to share with others. DeliveryAll items in stock and dispatched promptly, usually the same day. ReturnsShould you have any issue or just change your mind we're happy to accept returns within 30 days, providing the item is unused.

Price: 24.99 GBP

Location: Leek

End Time: 2024-12-23T14:09:31.000Z

Shipping Cost: 11.45 GBP