LOC Precision Flying Model Rocket Kit 2.26" LASERLOC 223 LOC LL223

Description: LOC Precision Flying Model Rocket Kit 2.26" LASERLOC 223 LOC LL223The LaserLOC series was one of the first production minimum diameter MID-HIGH POWER kits available to the public. Keeping the tradition going we have a few modern day tweaks that will put your skills to the test. A gentle laser etch around the slots allow for easier glassine removal. Multi-slot airframe allow the fins to click into the booster. Precut 4oz fiberglass cloth can be easily epoxied from fin-airframe-fin. This reinforcement will give your LaserLOC the strength for today’s higher impulse motors. Fiberglass should be applied with a long cure epoxy for best results. If you have never glassed anything before, here’s your chance! 1/4″ Launch lugs included. Fly away rail guides are another alternative. Full dual deployment ready with electronics bay and recovery included. Go ahead, drag race your fiberglass friends!!!Strong enough for supersonic flights. Light enough on your wallet and to fly an F motor!!!FinishingUsing a high build primer apply 2-3 coats. sand with 400 until spirals are filled. Paint as desired or follow below.Createx Paint. Follow manufacturers recommendations for applicationsTo achieve OEM color(s) the following paint was used and their respective ratios6002 Sealer Black 4258 Gloss Black 4004 Quick Silver. 1 lite coat, 2 moderate coats (do not over coat!) 4030/4657 3:1 Balancing Clear and Caribe Blue (until desired density)lightly sand with 1000 grit to knock down any overspray before applying decals. Clear as desired after decal application.Polyethylene Enhanced Nose ConeNylon Parachute RecoveryIncludes 2 starter blanketsPayload Section with Electronics Bay2.2" Slotted Airframe54mm Motor MountLaser Cut Rings and FinsRail Guides and Launch LugVinyl DecalEntry Level ComplexityMade in the USAComplexity: Expert Full Dual Deployment Ready Diameter: 2.2″ Height: 58.5 Weight: 28 ounces Motor Mount: 54mm minimum diameter – MMA-4 38mm includedParachute Size: 28″ Ripstop Nylon with 12″ DrogueShock Cord Type: 2x TN-316-15 15′ 3/16″ Tubular Nylon with sewn loops Shock Cord Mount: Snuffer Tube – 38mm motor tube + 2 centering rings Fin Thickness: 1/8″ Ring Thickness: Minimum Diameter Starter Recovery Blankets x2 Full Decals Instructions: YesMotors:F-25-7 750.G61-10 1300'H73-13 2400'I-115-16 5200' If you are just starting in the hobby start at the beginner level and move up from there at your own pace.What is needed to build and flyAll model rockets come in kit form that require assembly. The materials are primarily cardboard tubes, balsa or plastic fins and nose cone. Materials will vary by model and are typically specified in the description of each kit. Additional supplies will be necessary to build and finish your model rocket kit and may include:Scissors, Hobby KnifeRulerWood Glue, Model Cement or CA(Super Glue)SandpaperMasking TapeFinishing Supplies like:Wood FillerSealer/PrimerPaintLaunching Equipment and Supplies like:Recovery waddingLaunch PadLaunch ControllerPower supplyModel Rocket Motors and IgnitersA safe place to fly using guidelines from the National Association of Rocketry Safety Code

Price: 128.69 USD

Location: Dayton, Ohio

End Time: 2024-12-04T21:37:58.000Z

Shipping Cost: 0 USD