Line laser LWPRO red 50mW IP67 638nm LAMBDAWAVE BRIDGE SAW STONE WOOD CUTTING

Description: Industrial red/orange 50mW line laser LAMBDAWAVE LWPRO-638-50-RLINE The LWPRO industrial red/orange 50mW line laser is ideal for positioning material or marking out cutting lines on industrial machines, such as sawmills, wood saws and masonry machines. Using a line laser definitely increases the convenience of work and reduces material waste. Thanks to its IP67 rating and stainless steel housing, the laser can easily work in heavy dust or splashing, including, in particular, on machines where the workpiece is cooled by water or other coolant.Color: red/orangeOutput power: 50mWWavelength: 638nmSymbol: LWPRO-638-50-RLINEManufacturer: LAMBDAWAVELine thickness: 2-3mm (distance 5m)Power supply voltage: 4V-26V DCPower connector: M8, male, 3 pinFull waterproof and dustproof: IP67 ratingHousing: stainless steelDiameter: 20mmLength: 100mm (without power connector)Operating temperature: -20°C - 60°CService life: >20000h The set in this auction includes:LWPRO-638-50-RLINE line laserM8power cable with a length of 2m20mmmount Longer cables are available on our other auctions. Lasers with other powers and colors available on our other auctions or made to order. 375nm, 405nm (violet), 445nm, 450nm, 462nm (blue), 488nm (turquoise), 505nm, 515nm, 520nm (green), 633nm, 638nm, 658nm, 670nm, 685nm (red), 705nm, 785nm, 808nm, 830nm, 850nm, 905nm, 940nm, 980nm (infrared). The power range is from 1mW to 5000mW. Full documentation of the module in PDF format is available on our website: https://www.docs.lambdawave.eu/datasheets/LWPRO-638-50.pdf ApplicationWoodworking: sawmills, saws, multi-saws.Stone machinery: saws, multi-saws, automatic grinding machines.Textile industry: sewing machines, embroidery machines, presses.Industrial automationProduction linesAchievable line lengthOffice conditions or standard lit hall: clear line length up to about 3mOutdoor workunder a canopy or a heavily lit hall workstation: a clear line up to about 1m longOutdoor work in sunlight: clear line up to about 0.2m long Do not buy Chinese - bet on lasers made in Poland! We are the only manufacturer of line lasers in Poland - the rest of the products offered on Allegro, without exception, are Chinese! We do not import laser modules from China. The power supply systems, control software, housings and optics mounts used in our LWPRO lasers are 100% our design. As a result, we are able to meet the highest requirements of our customers, and manufacturing lasers in Poland makes us 100% sure of the highest quality of our lasers. We have almost a thousand satisfied customers. We export our lasers to more than a dozen countries around the world. In the photo: LAMBDAWAVE LWPRO laser modules ready for final assembly - housings, power circuits, optics and laser diodes. Top quality We are absolutely convinced of the superior quality of our LWPRO line lasers. Due to the fact that we are a manufacturer, we can easily adapt our product to specific customer requirements. Changing the output power, using different optics or replacing the power connector are possible even when ordering a single unit. Making the laser in a different housing or modifying the power supply circuit are also possible, although they make economic sense with a larger order. Safety Laser radiation can be very dangerous to the human eye. Never look into the beam directly or through optical instruments. Take special care when using the laser module indoors, especially watch out for reflective surfaces. Never point the laser beam toward people, animals, vehicles or aircraft. The laser module sold is an electronic component intended for incorporation into the final device and as such is not subject to IEC 60825-1. The device into which the laser module will be incorporated or integrated must be tested for safety and meet the requirements described in IEC 60825-1. According to IEC 60825-1, the laser module sold belongs to safety class 3B, whereby when the laser is properly mounted on the machine ensuring that a safe distance from the machine operator is maintained, the device with an integrated laser will be classified as a class 2M laser device. Construction of the LWPRO laser moduleOutput window made of AR-coated optical glass - easy cleaning and scratch resistance.Housing made of stainless steel - trouble-free operation in dusty and wet environments, even in aggressive environments. IP67 waterproof class.Line generating lens made of optical glass - clear and sharp line. On request - Powell lens, generating a line of uniform brightness.The center of the module made of brass - excellent heat dissipation and high thermal stability.AR-coated3-element glass collimator - clear and sharp line.Sealed - trouble-free operation in dusty and wet environments, IP67 rating.Laser diode - depending on the color - Osram, Sharp, Mitsubishi or Nichia - long and trouble-free operation over a wide temperature range.Laser diode power supply circuit designed and manufactured by LAMBDAWAVE with built-in microprocessor - wide range of supply voltages, high efficiency, thermal, reverse polarity power supply, soft-start, UVLO, OVLO, ESD protection. On request - possibility to remotely switch on and adjust laser power - potentiometer, TTL digital signal, analog signal e.g. 0-5V, 0-10V, 2-10V, current signal e.g. 0-20mA, 4-20mA, RS485, Modbus, CAN, analog or digital modulation up to 200kHz.Industrial M8power connector - trouble-free operation in dusty and wet environments, IP67 protection class. On request - other connectors according to customer specifications, such as M12 or cable gland. Which laser to choose?Below are typical configurations with expected line length and given lighting conditions Office conditions, standard lit hall:Line up to 0.5m: green 520nm 1-5mW, red 638nm 1-10mW, red 658nm 1-10mW.Line up to2m: green 520nm 30mW, red 638nm 50mW, red 658nm 100mW.Lineup to 5m: green 520nm 50mW, red 638nm 100mW, red 658nm 200mW.Line up to 10m: green 520nm 100mW, red 638nm 200mW. Outdoor operation under canopy or shade, indoor operation under strong lighting:Line up to 0.5m: green 520nm 5-10mW, red 638nm 10-50mW, red 658nm 10-50mW.Line up to2m: green 520nm 50mW, red 638nm 100mW, red 658nm 150mW.Line upto 5m: green 520nm 100mW, red 638nm 150mW.Line upto 10m: green 520nm 200mW, red 638nm 200mW. Outdoor operation, sunlight:Line up to0.5m: green 520nm 50-100mW, red 638nm 100-200mW, red 658nm 200mW.Line upto 2m: green 520nm 100-200mW, red 638nm 200mW. Will the line be clearly visible?The visibility of the laser line depends on:Laser powerThe wavelength (color) of the laserThe length of the lineThe thickness of the lineThe color of the material being processedAmbient lighting conditions Laser power directly affects the brightness of the line. Higher power - brighter line. Thewavelength (color) of the light affects the brightness of the line, because the human eye has different sensitivity for different colors. The highest sensitivity is around green, lower sensitivity around red (638nm, 658nm), and very low sensitivity around violet (405nm). For example - a 520nm 10mW green laser has similar brightness to a 638nm 20-30mW red laser and similar brightness to a 658nm 50-100mW red laser. Thelength of the line affects the brightness of the line, because the longer the line, the lower the brightness per unit area at the same laser power. The longer the line, the lower the line brightness, which has to be compensated by increasing the laser power. The length of the line depends on the placement of the laser on the machine. The farther away from the material being processed, the longer the line. Line thickness affects line brightness in the same way as line length. The thicker the line, the poorer its visibility. LWPRO lasers generate a line thickness of 2-3mm as standard at working distances of up to 10m. In special applications, where the distance to the material is small - up to 2m - and fixed, we can set, at the module production stage, a smaller line thickness. At a working distance of 1m, a line thickness of less than 1mm is possible. The color of the processed material can make a difference if it is intense. For example - if only blue material is processed, it will make sense to use a blue laser, even though a green laser of the same power is theoretically much brighter. Why? The material is blue in color because it reflects blue light and absorbs the rest of the colors. Ambient lighting conditions have a huge impact on the visibility of laser lines. It is one thing to work in a standard office or hall environment (300-500 lux illumination), another to work outdoors in a shaded area or on a well-lit indoor workstation (1000-2000 lux), and yet another to work in full sunlight (30000-100000 lux). The brighter the work environment, the more laser power is needed to make the line clearly visible.Calculators that calculate line visibility If you want to compare the brightness of two lasers, for example, to see how the wavelength (color) affects the brightness at the same power, we have such a calculator on our site: https://docs.lambdawave.eu/tools/relative_brightness_calculator.html If you know the lighting conditions (illuminance in lux) prevailing in the place where you want to place the laser, you can directly calculate the line contrast. A reasonably well visible line starts with a contrast (in the calculator - Weber contrast) of 1:1. A well visible line requires a contrast of 3:1-5:1. The line visibility calculator can be found with us at: https://docs.lambdawave.eu/tools/line_visibility_calculator.html Application - wood industryMaterial positioningDetermination of cutting lines Application - stone industryMaterial positioningCutting line determination Application - Textile industryMaterial positioningDetermination of cutting linesWorkpiece positioning Application - otherStoragePositioningProduction lines3D scanningEntertainment industry

Price: 189 USD

Location: Gdansk

End Time: 2024-02-29T14:13:34.000Z

Shipping Cost: 0 USD