Lap Geomembrane Liner Hot Wedge Welding Machine 0.5-5m/Min HDPE PVC EVA Welder

Description: Lap Geomembrane Liner Hot Wedge Welding Machine 0.5-5m/Min HDPE PVC EVA WelderDescription Packing List: Climbing Welding Machine + Tool Accessory Kit + Tool Box + Manual Specification: Lap Width: 10cm Voltage:110V 50Hz Welding Material Thickness: Rubber Wheel 0.2-1.5mm Welding Seam Width: Two 12.5mm, Inspection Seam 12mm Power: 800w Welding Strength: ≥85% Base Material (Tensile Resistance in Shear Direction) Welding Speed: 0.5-5m/Min Whole Machine Weight: 5kg Product Size: 31*14*21cm (12.20*5.51*8.26inch) Heating Temperature: 0-450 Insulation Class: Class Li Power Fuse: 4a Motor Fuse: 1a Scope of Application: Suitable for Pe, Pvc, Hdpe, Eva, PpFeatures:1. Intelligent Control, Control BoxFeedback Type Intelligent Control System, Using Imported Components, Precise Control and Long Service Life.2. Imported Silicone Pressure Roller, Good Elasticity, High Temperature Resistance, Suitable for Welding 0.2-1.5mm Materials.3. Super PowerSpecial Alloy Wedge Knife Supporting High-power Heating Tube (800w), Heating Faster4. Pressure Adjustment InstructionsTurn Clockwise to Adjust the Pressure to Increase, and Turn Counterclockwise to Reduce the Pressure; It Is Forbidden to Press the Two Pressure Rollers Together to Run Idly5. Wide Range of ApplicationWidely Used in Highways, Tunnels, Bridges, Reservoirs, Buildings, Artificial Lakes, Swimming Pools, Breeding Ponds, Landfills Operation Procedure:1. the Joystick Is Leveled to Separate the Upper and Lower Pressure Rollers to Prevent the Pressure Roller from Idling and Damaging the Machine After Starting the Machine.2. Turn on the Power and Turn on the Power Switch.3. Set the Temperature First. for Materials Above 1mm, the Temperature Is Adjusted to About 350 Degrees. When the Indicator Light on the Control Box Is Red, It Is Heating.4. Adjust the Welding Speed According to the Thickness of the Material. According to the Normal 1mm Material, the Speed Is Adjusted to About 2.5m. 5. When the Red Light of the Control Box Turns to Green, Put the Materials in from the Left and Right Sides of the Machine, and the Joystick Is Driven from Bottom to Top, and It Is 90 Degrees to the Ground.6. Adjust the Speed According to the Welding Effect, the Temperature Is High and the Speed Is Fast, on the Contrary, the Temperature Is Low and the Speed Is Slow (Try Not to Adjust the Speed and Temperature in the Middle,Set the Temperature First When Turning on, If the Material Is Thinner or the First-time Operation, Set the Temperature Lower When Turning on)7.After the Welding Is Completed, Immediately Level the Joystick to Separate the Upper and Lower Pressure Wheels (to Prevent the Pressure Roller from Being Burned by High Temperature), Then Adjust the Temperature Speed to the Lowest, and Finally Shut down and Unplug the Power Supply.PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.shipping noticeCan not ship to Puerto Rico,Alaska/HawaiiMPNDoes Not ApplyBrandUnbrandedItem TypeAuto Welding MachineLap Width10cmVoltage110V 50HzWelding Material ThicknessRubber Wheel 0.2-1.5mmWelding Seam WidthTwo 12.5mm, Inspection Seam 12mmPower800WWelding Strength≥85% Base MaterialWelding Speed0.5-5m/MinHeating Temperature0-450℃Scope Of ApplicationSuitable For Pe, Pvc, Hdpe, Eva, PpProduct Size31*14*21cm (12.20*5.51*8.26inch)Whole Machine Weight5KgOn Dec 18, 2024 at 18:29:45 PST, seller added the following information:

Price: 633.52 USD

Location: Chino, California

End Time: 2025-01-19T02:23:39.000Z

Shipping Cost: 0 USD