Land Rover Discovery 2 Td5 3 inch lift Blocks Spacer Kit Front + Rear Springs

Description: Discovery 2 75mm ( 3" inch ) lift Block Set of 4 Designed to fit between the coil spring seats and the axle bracket to achieve a 75mm ride height increase without the expense of having to replace the springs.Manufactured in the United Kingdom6mm Structural S275JR Grade SteelGalvanized and Yellow Passivated to protect against corrosionDesigned to fit all Discovery 2 models with spring suspension. NOT air suspension.Uses existing mounting holes & additional bolts supplied It is advisable to install disco-2-shock-droppers and longer shock absorbers to regain the travel that is lost on the rear axle. Longer Bump stops may also be required to avoid the springs from being over-compressed. No Front Shock travel is lost as the spacer also relocates the lower shock mount. Longer Bump stops may also be required to avoid the springs from being over-compressed. NOTE: THESE WILL NOT FIT DISCOVERY 2 MODELS WITH REAR AIR SUSPENSION. SEARCH FOR US ON FACEBOOK: @ratelxindustries Please note that all our Ratel-X Industries products are designed for off road use only. The effectiveness of this equipment is directly related to the manner in which it is installed, used, and/or maintained. Proper installation, use and maintenance is solely the responsibility of the installer/user, and will not be assumed by Ratel-X Industries. Ratel-X Industries accepts no liability for loss, damage, injury or death caused by and/or resulting from the use of our parts or products.

Price: 72.5 GBP

Location: Rossendale

End Time: 2024-09-16T21:40:53.000Z

Shipping Cost: 51.8 GBP