Icom Ultra Compact USB Digimode Interface for FT8, JT9, JT65, PSK31 etc

Description: The XGGCOMMS.COM USB-Digimode-3-MicroAre you interested in operating modes such as FT8, JT65, PSK, Echolink etc? Our Digimode-3-Micro Interface is an ultra-compact USB Sound Card with built-in VOX PTT to allow you to operate FT8, JT65, PSK, Echolink and just about any other AFSK mode.It plugs into a free USB port on your PC and the Data/Accessory port on you transceiver.It is fully supported in software such as WSJT-X, Fldigi, Echolink, MixW, Digipan and many more. It is plug-and-play with the built-in codec drivers already built into Windows, Linux and MacOS. The interface cable is pre-wired for your radio and so there are no extras to buy. Just let us know which radio you have at purchase so that we can fit the correct Data plug. It is all you need for Digital Mode Operation.Interface Key FeaturesBuilt-in C-Media USB Audio codec. We have fitted the USB audio codec into the USB plug shell together with the built-in VOX operated PTT. Windows, MacOS and Linux compatible. The CM108B codec drivers are already built into common operating systems as a generic USB Audio Device so there is no driver to install.Frees up your PCs sound card. As the interface gives you a separate USB sound card dedicated to your Digimode activities, it frees up your PCs internal sound card for normal Windows duties. Plug and Play. No additional cables required. Simply plugs into your PC on a spare USB port. At the transceiver, connects directly into Data/Accessory/Packet Port. Works with FT8, JT65, PSK, Echolink and many more. Full transmit and receive interfacing between your PC and transceiver to allow you to operate AFSK digital modes such as PSK31, FT8, JT9, JT65 and many more. Software Compatibility. WSJT-X - Fldigi - Digipan - Echolink - MixW - and many more Simple to use. Simple audio level adjustment via operating systems Speaker and Mic level control sliders. VERY compact. It is just one cable!!! Codec is in the USB plug. Provided with 1.5m Cable and terminated in accessory/Data plug. Radio compatibility. See the compatibility list below. You need to let me know which radio you need the interface making up for so we can fit the correct Accessory/Data plug Cable length. From PC to Radio is 1.5m. Message me if you need a little more. Instruction Manual. We will send you a download link for the instruction manual in the package. There is a quick "get you going" guide below. Icom Transceiver Compatibility List Important --- Please let me know which radio you need the interface making for when you purchase. We need to fit the correct 8 or 13 pin accessory plug. Icom 13 pin Din Accessory Port IC-78, IC-703, IC-706 (All Versions), IC-718, IC-7000, IC-7100, IC-7200, IC-7300, IC-7410 and IC-9100 plus any others with the 13 pin Din accessory connector.Icom 8 pin Din Accessory Port IC-746, IC-746 Pro, IC-756 Pro, IC-756 Pro 2, IC-756 Pro 3, IC-910H, IC-7400, IC-7600, IC-7610, IC-7700, IC-7800 and any other IC series with CAT and 8 Pin Din Accessory connector. A Quick Start Guide (a detailed PDF instruction sheet will be sent to you when you purchase)Plug USB plug into a spare port on your PC. The built-in C-Media Sound Card drivers are already built into Windows. The interface will pop up as a Generic USB Audio Device. Plug Din plug into packet/data/accessory port on your transceiver. If you are not using a CAT interface, set the your digimode software to not use CAT control or set the radio type to "None". Set your Digital Mode/PSK31 software to PTT key via VOX The interface uses the LEFT audio channel audio to trigger the VOX PTT and the RIGHT channel audio for Tx drive. Use the OS sound card level balance sliders for this sound card to have Maximum output on the LEFT audio channel. This will guarantee VOX PTT keying. Use the balance slider for the RIGHT audio channel to optimise your transmit power. Make sure you keep your transmitter out of ALC for optimum PSK31 operation. Keeping your output stage nice and linear is the name of the game when working digital modes. Who are XGGCOMMS?We are a small company formed by Steve (G8XGG) and have been trading on eBay since 2006. We sell a large selection of Ham Radio CAT control and Digital mode products for the main ham radio equipment manufacturers. All of our products are assembled and tested in the workshop in The UK. We offer full support on our products and so if you need any set-up help, you only need to send us an eBay message and we will be glad to help out. For our full range of products visit our eBay Shop Shipping Policy and expected delivery times We are based in The UK and use UK Royal Mail Small Packets for all shipments. Our order processing time is no longer than 2 days. The postal service used does not come with any tracking but is generally highly reliable. International shipments are highly dependant on customs delays, holiday periods and local postal services and so can take anywhere from 5 to 23 business days once shipped. If there is no arrival at 28 days, please contact me so we can resolve the issue and re-ship if required. Warrantee Terms All of my products come with a full 30 day satisfaction guarantee and 12 Month warrantee against material failure. If you are unhappy with the product for whatever reason within the first 30 days, I will offer you a full refund of monies paid as long as the interface is returned to me in "As New" condition. In the unlikely event of the product failing in the first 12 months, ship it back to me and we will check and repair the item and send it back to you as new.

Price: 49.99 USD

Location: Droitwich

End Time: 2024-11-03T16:52:15.000Z

Shipping Cost: 0 USD