Description: 5x7 “H- Bar” Aeroponic / Hydroponic Manifold for Cloning & Net Pot Wetting 10 red 360 Degree Sprayers Build your own Cloning Bucket Consists of: 1 x 5x7 inch “H” Bar with 10, 360 degree spray heads (12 included) 1 x 8 inch riser (can be cut for best size fit) 1 ½ inch male adapter glued to the riser Manifold is ½ inch CPVC and all sections are glued except where the riser pops into the “T”. You can glue it in place or leave it as a blow out point if the sprayers get jammed. This will take pressure off the pump and keep it from failing. Based on a riser height of 8 inches or below a 150 GPH pump should work. The ½ male adapter segment allows for screwing into a female threaded pump. Using a 150 gph pump the spray area can be up to 40 x 30 inches in coverage. This can be seen in the UV/fluorescent test picture. What you do: Gently screw in the spray heads. Don't over tighten and snap them off. Select your riser height or keep it as is. Insert the riser into the “H”. Connect the manifold to the pump with the threaded ½ inch male adapter end of the riser. Pump not included.
Price: 22 USD
Location: Fort Lauderdale, Florida
End Time: 2024-03-07T18:34:55.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: Southern Research Group
Number of Items in Set: 2
Number of Sites: 10
Type: Aeroponics
Item Height: 9 in
Color: Beige
Indoor/Outdoor: Indoor & Outdoor
Material: PVC
Set Includes: Connection Set, Hose
Item Length: 9 in
Country/Region of Manufacture: United States
Item Width: 9 in
