Huepar Laser Level 360 Self Leveling, 4x360° Green Cross Line Laser S04CG

Description: 4 X 360° Laser level】 The laser level provides 4 x 360 planes of laser light. The top 360° horizontal line is nice for ceiling installation. The bottom 360° horizontal line is for tiling application that can hit the ground at 1/2inch ultra-low distance. The distance between two 360° horizontal line is 3.5inches. With lifting base, the 360° floor laser can raise from the surface between 1" and 3.54" height. Two 360° vertical lines cross at 90° help quickly visualize and finish square layout. 【LCD Screen & Bluetooth APP/Remote Control】The laser level has LCD screen to get the status of battery, angle, pendulum and pulse mode on the display. Bluetooth Tech enables to control the setup of the laser with Huepar App on smart phone and Remote Control at a distance up to 98Ft. The App and remote control can switch ON/OFF the laser lines, pulse mode and select the laser planes. Huepar App also provides out-of-level alarm. The laser tool can connect two Bluetooth devices at the same time. 【2600mAh Li-ion Battery with Type-C Charging Port & 4 AA Batteries】This 360 laser tool adopted 7.4V / 2600mAh Li-ion battery with Type-C charging port (can be recharged separately) for extended run-time, or with 4 AA alkaline batteries (with a battery holder). Besides, this 4D laser level can be used at job site by plugged in when take out the battery. With Type-C charging port, the 16 lines laser level can also be charged by laptop, power bank, car charger, etc. 【Lines Switch/Self-leveling/Manual Mode & Pulse Mode】 The 4 x 360° laser planes can be selected by separate H and V button on the keypad. With smart pendulum, the level laser self levels and indicates out-of-level condition while pendulum unlocked. The line laser will beep when out of self-leveling range ±3.5°. Once pendulum locked, it switches to manual mode to lock lines for use at any angle. Pulse mode extends laser range up to 200Ft. with Huepar Laser Receiver LR-6RG/LR-5RG. 【Magnetic Bracket & Durable Design】Strong magnetic bracket allows for quick positioning to metal surfaces to hang the laser tool for wall applications. The laser offers 1/4"-20 mount thread to suit a standard tripod or pole mount. Over-molded metal laser window with IP54 water/dust proof withstands tough job site conditions and can be removed and replaced with a screwdriver. The kit has a hard carry case bringing much more convenience to carry and store the laser tool.

Price: 170 USD

Location: Bridgeport, Connecticut

End Time: 2024-11-16T19:51:49.000Z

Shipping Cost: N/A USD