HELIX M SIX DSP 6x100w 10-Ch DSP + M ONE 600w @ 1-Ohm Monoblock Sub Amp NEW

Description: HELIX COMBO HELIX M SIX DSP 6x100w RMS + 10-Channel DSP HELIX M ONE 600w RMS @ 1-Ohm Monoblock Subwoofer Amplifier HELIX M SIX DSP Features § Up to 130 Watts RMS max. output power per channel into 4 & 2 Ω § Extremely powerful 64 Bit “fixed point” Audio DSP and state-of-the-art AD and DA signal converters § ACO – Advanced 32 Bit CoProcessor platform for enhanced system and DSP features like: § ISA (Input Signal Analyzer) and InputEQ for easy analysis and compensation of input signals § SFX sound effects – Augmented Bass Processing, StageXpander, RealCenter & Co. § Smart 6-channel highlevel input with ADEP.3 circuit § Four RCA / Cinch line outputs with max. 6 Volts output voltage § Virtual Channel Processing (VCP) allows even more flexible configuration for highly complex sound systems § Bridgeable amplifier channels for driving powerful woofer or subwoofer § DSP-board manufactured in Germany Technical data Power RMS ≤ 1% THD+N - @ 4 Ohms 6 x 100 Watts - @ 2 Ohms 6 x 100 Watts - @ 1 Ohm - - bridged @ 4 Ohms 3 x 200 Watts - bridged @ 2 Ohms - Max. output power per channel* Up to 130 Watts RMS @ 4 / 2 Ohms Amplifier technology Class D Inputs 6 x RCA / Cinch 6 x Highlevel speaker input 1 x Optical SPDIF (12 - 96 kHz) 1 x Remote In Input sensitivity RCA / Cinch 1 - 4 Volts Highlevel 5 - 20 Volts Input impedance RCA / Cinch 22 kOhms Input impedance highlevel 9 - 33 Ohms or 20 kOhms Outputs 6 x Speaker output 4 x RCA / Cinch 2 x Remote Out Output voltage RCA / Cinch 6 Volts Frequency response 20 Hz - 22,000 Hz DSP resolution 64 Bit DSP power 295 MHz (1.2 billion MAC operations/second) Sampling rate 48 kHz DSP type Audio signal processor Signal-to-noise ratio digital input 105 / 108 dB Speaker / Line Output (A-weighted) Signal-to-noise ration analog input 102 / 105 dB Speaker / Line Output (A-weighted) Distortion (THD) < 0.03 / 0.005 % Speaker / Line Output Damping factor 100 Operating voltage 10.5 - 16 Volts (max. 5 sec.down to 6 Volts) Idle current 1950 mA Max. remote output current 500 mA Operating temperature range -40° C to +70° C Fuse 2 x 35 A Maxi-fuse (APX) Power rating DC 12 V ⎓ 80 A max. Additional features ADEP.3 circuit, Auto Remote switch, 32 Bit CoProcessor, Control Input Dimensions (H x W x D) 50 x 320 x 154 mm / 2.00 x 12.60 x 6.06” * In typical multi-channel applications (2- / 3-way system + rear + subwoofer) HELIX M ONEFeatures § Small footprint Class D amplifier with high output power of 600 Watts RMS @ 1 Ohm for easiest combination with all 2 x 2 Ohms subwoofers connected in parallel § Start-Stop capability down to 6V supply voltage § Smart highlevel input with ADEP circuit (Advanced Diagnostics Error Protection) and Auto Turn-On function § Integrated, active crossover with lowpass, bass boost, subsonic and phase control § Extremely stable output stage with high-current power transistors and 1 Ohm stability § Bass remote control for volume adjustment § SMD (Surface Mounted Device) manufacturing technology combines minimum space requirement with maximum reliability § Exclusive, extremely compact and clean design with illuminated HELIX-logo and low heat dissipation thanks to extraordinary efficiency Technical data Output power RMS ≤ 1% THD+N - @ 4 Ohms 1 x 240 Watts - @ 2 Ohms 1 x 410 Watts - @ 1 Ohm 1 x 600 Watts - bridged @ 4 Ohms - - bridged @ 2 Ohms - Max. output power per channel* Up to 720 Watts RMS @ 1 Ohm Amplifier technology Class D Inputs 2 x RCA / Cinch 2 x Highlevel speaker input 1 x Remote In 1 x Remote control input Input sensitivity RCA / Cinch 0.5 - 6 Volts Highlevel 1.1 - 13 Volts Input impedance RCA / Cinch 20 kOhms Input impedance highlevel 13 Ohms Outputs 1 x Speaker output Output voltage RCA / Cinch - Signal converter for digital input - Frequency response 10 Hz - 250 Hz Bass boost 0 - 12 dB / 25 - 75 Hz Highpass - Lowpass 50 Hz - 250 Hz adjustable Bandpass 10 Hz - 250 Hz adjustable Subsonic 10 Hz - 50 Hz adjustable Phase 0 - 180° adjustable Slope high- / lowpass - Slope subsonic / lowpass 12 / 24 dB/Oct. Signal-to-noise ratio digital input - Signal-to-noise ratio analog input 95 dB (A-weighted) Distortion (THD) 0.20 % Damping factor 100 Operating voltage 10.5 - 16 Volts (max. 5 sec. down to 6 Volts) Idle current 650 mA Operating temperature range -40° C to +70° C Fuse 2 x 35 A Maxi-fuse (APX) Additional features Active, adjustable crossover, bass boost, phase shift, Start-Stop capability, highlevel input with automatic turn on function and Advanced Diagnostics Error Protection (ADEP), bass volume cable remote control Dimensions (H x W x D) 50 x 230 x 154 mm / 2.00 x 9.06 x 6.06” * In typical applications as subwoofer amplifier

Price: 1129 USD

Location: Yakima, Washington

End Time: 2024-09-03T03:45:21.000Z

Shipping Cost: N/A USD