Heavy Duty Pneumatic Vibrator Global Mfg Inc C3-4.0-4AC

Description: Heavy Duty Pneumatic Vibrator Model: C3-4.0-4AC 2 Bolt permanent type mounting Mount Hole: Center to Center 8" Air Inlet: 1/4" NPT Speed: 4050 RPM @ 40 Psi Speed: 4540 RPM @ 60 Psi Speed: 5170 RPM @ 80 Psi Weight: 46 Lbs Rugged Construction - Ductile iron housings and lightweight hardened aluminum covers. Vibrator Component Alignment - All manufactured equipment contain slight alignment variations due to manufacturing tolerances. Global’s Design Series vibrators have an unique drive coupling design, to compensate for typical alignment variations that exist when two shafts are connected (motor shaft and vibrator shaft). The coupling keeps the vibrational stress off the motor shaft seal. This prevents the motor from leaking because if the motor shaft is allowed to vibrate it would slowly destroy the seal making it ineffective. Some competitive vibrators use the conventional ‘shaft-in-a-shaft’ design; the drive motor shaft slips into the vibrator shaft. This design works only if both shafts remain in perfect alignment regardless of operating conditions. This arrangement often causes motor shaft flexing and fretting within the vibrator shaft, which leads to premature motor failure and a worn out vibrator shaft. Drive Coupling Assembly - The drive coupling allows the motor shaft and vibrator shaft to operate as an "assembly", preventing fretting and stress from misalignment or expansion. Any misalignment or expansion wear takes place in the inexpensive and easily replaced coupling rather than in the motor or vibrator shaft. This superior design protects the motor shaft, vibrator shaft, bearings and seals from the vibration of the unbalanced weights. The result is better performance, no leaks, longer service, and reduced operating costs. Bearings - All bearings are sealed to keep grease in and contaminants out. Our unique oil lubrication system in the D7 and CC7 models helps extend the life of the bearing. The coupling design isolates the unbalanced load from the motor, so the motor bearings see only a balanced load, extending bearing life. Grease lubrication is also available. Air Motor Shaft Seal is isolated from the unbalanced load by the coupling design, extending the life of the seal and preventing air leaks. High Efficiency, Durable, Bi-rotational Pneumatic Motor - Instantly reversible, can be stalled or overloaded without damage, self sealing vanes automatically adjust for their own wear ensuring constant output for thousands of hours. Air Motor Repair Kits available to return motor to like-new condition. Easy Repair and Maintenance - designed for easy change-out of bearings, motors, couplings, and other components to refurbish Design Series vibrators to like new condition. Bearings, o-rings, retaining rings, etc. are standard, commonly available parts. High Amplitude, Moderate Frequency vibration. Versatile - Easy to control force and frequency by adjusting air supply. Available in Permanent Mount and Portable Clamp-on Mount. Clamp-on vibrators use square head set screws with concave cup points for positive self-locking and vibration resistance. Produces Uniform, Directional Flow. Listing and template services provided by inkFrog

Price: 357.49 USD

Location: Romulus, Michigan

End Time: 2025-01-07T13:39:21.000Z

Shipping Cost: N/A USD