Description: Heavy Duty 4 in 1 Ball Joint Press & U Joint Removal Toll Kit with 4x4 Adapters Quality SetThis DAYUAN tool set is made of ultra carbon steel, these components will stand up to heavy use and accidental drops. It's even for professional mechanics.Wide VarietyThis tool set fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball jointsEast StorageComes in a blow molded case for safe & easy transport and storage. PRODUCT 4-IN-1, 4 wheel drive ball joint remover/installer kit. Perfect for 4WD ball joint service/repair. 1 "C" frame press 1 "C" frame screw Excellent for removal and installation of press-fit parts such as ball joints. Universal joints and truck brake anchor pins. It will also remove rusted and corroded parts. High impact blow molded storage case included. Set contains C-frame press, 3 receiver tubes sizes: 2-3/4”x3"", 2-1/4”x 2-1/2” & 1-3/4”x2”, installation and removing adapters. From the band Started by providing OEM services for renowned brands, we've dedicated a decade to the automotive tools industry. With our exceptional quality and the widespread adoration of our products among mechanics, we initiated the journey of managing our own brand: DAYUAN. In the next decade, we aim to combine our manufacturing expertise with e-commerce, ensuring more consumers can afford quality automotive tools. Product description Removal Adapter (1.148" L x 1/2" I.D. x 3" O.D.) Screw Installing Cup (3.676" L x 1-3/4" I.D. x 2" O.D.) Installation Adapter (1.122" L x 0.941" I.D. x 3" O.D.) Forcing-screw Press (Inner Length: 6.22"/158mm) Receiving Cup (2-1/2" L x 2" I.D. x 2-1/4" O.D.) Receiving Tube (1-3/4" L x 1-3/4" I.D. x 2" O.D.) Receiving Tube (1-3/4" L x 2-1/4" I.D. x 2-1/2" O.D.) Receiving Tube (2-1/4" L x 2.723" I.D. x 3" O.D.) Install Cup Adapter (0.845" L x 1.879" I.D. x 2-1/4" O.D.) To Remove a Ball Joint 1. Assemble the Ball Joint Press over the vehicle's control arm. Select the correct size Receiving Tube (3,4,or 5), and position it under the vehicle's ball joint. 2. Place the Removal Adapter between the Receiving Tube and the Jackscrew . 3. Then, place the Installation Adapter between the top of the ball joint and the Ball Joint Press. 4. Tifhten the Jackscrew until the Receiving Tube contacts the vehicle's control arm. 5. Check the alignment of all the Ball Joint Kit parts, and continue tightening the Jackcrew until the vehicle's ball joint is removed. To Install a Ball Joint 1. Clean the vehicle's control arm, and coat the inside diameter of the control arm with a light lubricant. 2. Insert the replacement ball joint as straight as possible into the vehicle's control arm. 3. Assemble the Ball Joint Press over the vehicle's control arm. Select the correct size Receiving Tube and position it on top of the vehicle's control arm. 4. Place the Installation Adapter between the Receiving Tube and the Ball Joint Press. Then, place the Removal Adapter between the ball joint and the Jackscrew. 5. Check the alignment of all the Ball Joint Kit parts. Then, tighten the Jackscrew until the vehicle's ball joint is firmly sealed.To Remove and Install Brake Anchor Pins 1. To remove the brake anchor pins, remove all lock ring retainers from the Brake Anchor Pins.2. Position the Ball Joint Press over the brake spider.3. Tighten the Jackscrew until the anchor pins can be removed.4. To install the brakke anchor pins, insert the brake anchor pins. Then reinstall the lock ring retainers on the brake anchor pin.5. Unscrew and remove the Ball Joint Press.To Disassemble / Assemble a U Joint1. To disassemble a U joint, remove any external and/or internal lock rings.2. Position the Ball Joint Press around the drive shaft yoke and tighten the jackscrew until the first bearing is removed. Reposition the ball joint press and remove the second bearing.3. To assemble a U joint, clean all dirt and oil from the yoke area. Align the replacement bearing and Ball Joint Press as straight as possible over the yoke. Press the replacement bearing into the yoke, and reassemble the external/internal lock ring.4. Reposition the ball joint press and second eplacement beaing as straight as possible over the yoke, and press the beaing into the yoke.5.Reassemble the external/internal lock ring. Shipping We offer FREE shipping on all orders! We ship within Three business days of payment, usually sooner. We use a selection of shipping services such as UPS, FedEx, USPS etc. We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed. Local pickups and combined shipping options are not provided at this time. Return You can return a product for up to 30 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Payment We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Feedback Customer satisfaction is very important to us. If you have any problem with your order, please contact us and we will do our best to make you satisfied. Contact Us If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays. Please visit our eBay store to check out other items for sale! Thank you for shopping at our store.
Price: 34.99 USD
Location: Los Angeles, California
End Time: 2024-12-04T11:04:31.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Product Group: Joint Press
Product Style 1: Ball joint press
Product Style 2: Ball joint press tool
Product Style 3: Heavy duty ball joint press
Product Style 4: 4x4 ball joint press
color: silver, black
Package include: 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter
With this Complete Joint Set you will be able to.: Remove/Install Brake Anchor Pin
Package include .: 1x Installing Cup
Product Type 1: DAYUAN ball joint press kit
Product Dimensions: 16.9 x 14.5 x 3.9 inches
Product Type 2: Ball joint press kit
Is Discontinued By Manufacturer: No
Product Type 3: U Joint Removal Tool Kit
Product Type 4: Heavy duty ball joint press u joint removal tool
With this Complete Joint Set you will be able to: Remove Upper/Lower Ball Joints; Install Upper/Lower Ball Joints
UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES: Fit most American domestic 2WD, 4WD, light pickup trucks
Warranty: 1 Year
Manufacturer Part Number: YT-1040
Material: High-carbon steel + plastic box
Size of Case: 38cm/14.96in × 28cm/11in × 8cm/3.15in
Brand: Branded
Product Type 5: u joint removal kit
PROFESSIONAL GRADE QUALITY AND DURABILITY: heavy-duty forged steel with black-oxide finish on adapters
CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE: plastic blow-molded carrying case with handle for easy storage
Type: Ball Joint Press, U Joint Removal, Tool Kit with 4x4 Adapters for Most 2WD and 4WD Cars and Light Tr, emove Upper/Lower Ball Joints, Install Upper/Lower Ball Joints, Remove/Install Brake Anchor Pin, Disassemble/Assemble Universal U Joints, 4-IN-1, 4 wheel drive ball joint remover/installer kit, Perfect for 4WD ball joint service/repair. 1 "C" frame press 1 "C
3 receiver tubes sizes: 2-3/4”x3"", 2-1/4”x 2-1/2” & 1-3/4”x2”
Package include.: 1x Screw, Install Cup Adapter, Forcing-screw Press, Receiving Cup
adapter that allows service for: 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle
Item Weight: 15.4 pounds
