Headlight for 2005 2006 Toyota Tundra 2005 2006 2007 Sequoia Headlamp 1 Pair

Description: 1. About this item【What You Get】1 Pair of Headlights(Bulbs are not included). High beam bulb type: H4, Low beam bulb type: H4. Based on the original factory headlight model, we have upgraded the metalized reflectors with high high transmittance PC lens provides a brighter and clearer vision to increase your driving safety at night. This product comes with a 1 year free warranty service. If you have any problems, welcome to contact us. We will give you professional service with a friendly attitude. 【Better Vehicle Compatibility】Compatible with ‎2005-2006 Toyota Tundra Base / SR5 / Limited 4-Door (Compatible on Double Cab models only), 2005-2007 Toyota Sequoia SR5 / Limited models Only. 【10Mins Fast Installation】Plug-n-play style. No need drilling or modification. We also provide installation guidance. 【Excellent Durability】The impact resistant fully sealed structure enables the headlights to provide reliable performance in various weather conditions and areas. The waterproof level reaches IP65. 【The TopAutoGear Advantage】Headlight Assembly is TopAutoGear's core products. Strictly adheres to all DOT and SAE, ensuring the safety and compliance of our all headlights. 2. Operation. NOTICE! Recommended professional installation. The following methods are forreference only. 1. Ensure safety: Park the vehicle in a flat and stable area. Open the engine compartment and ensurethat the vehicle is turned off and in a parked state. Wait for the vehicle to cool down, especially if youhave just driven. 2. Look for light bulbs: Depending on the vehicle model, it may be necessary to remove somecomponents to locate the headlight bulb, such as the battery or air filter. Find the bulb socket behindthe headlights. 3. Remove the old headlight assembly: Rotate the bulb socket to release it from the fixing clip orfixing point. Gently pull out the light bulb. Do not let your bare hands touch the light bulb. Ensurecareful operation during this process to avoid damaging any components. 4. Install new headlight assembly: Before installing a new headlight assembly, it is recommendedthat you wear gloves to prevent grease from contaminating the bulb, which may shorten its lifespan. Insert the light bulb into the socket, ensuring that it is completely aligned with the socket. Rotate the bulb socket to secure it in the appropriate position. 5. Reassemble: If you've removed any parts just to access your bulbs, now is the time to reinstallthem. Make sure all parts are securely held in their original positions. Fix the headlights with screws. 6. Test the new headlight assembly: Turn on the vehicle and test the new headlight assembly toensure it is working properly. Check the focus and direction of the headlights to ensure they arecorrectly aligned and do not cause interference to other drivers. How to Remove Temporary Condensation: 1. Check the vents to prevent blocking and switch on the low beam light for about 20 mins 2. Take the headlight bulb out and drive out moisture 3. Put a silica gel packet in the housing to soak up moisture 3.Troubleshooting.FaultPossible causeSuggested remedyThe headlamp is not securely installed.The screw fixing is unstable.Please recheck the position and depth of the screw fixing.Not a great fit.This device is not suitable for your vehicle.Please check if your car model matches the compatible model published in this manual. And please contact the seller to resolve the issue.The product is damaged.Damaged during transportation.Please contact the seller to resolve the issue.The headlight were starting to fog over.There is an issue with the sealing of the product.Please contact the seller to resolve the issue. 4. Technical data. Headlight AssemblyVehicle Service Type:‎2005 2006 Toyota Tundra Base / SR5 / Limited 4-Door (Compatible on Double Cab models only), 2005 2006 2007 Toyota Sequoia SR5 / Limited models Only Light Source Type:‎High Beam:H4,Low Beam:H4(Bulbs not included) Auto Part Position:‎‎Front OutsideSpecial Feature:Dustproof and waterproofVoltage:12 VoltsLens Color:‎Crystal ClearLens Material:‎PolycarbonateOEM Part Number:‎‎‎‎811100C031, 811500C031 ABPA Partslink Number:‎‎‎‎‎TO2502158, TO2503158 Color:‎Chrome Housing Clear ReflectorWarranty:1 YearSKU:TT05COO170250

Price: 93.9 USD

Location: Los Angeles, California

End Time: 2024-10-20T08:21:09.000Z

Shipping Cost: 0 USD