ELEGOO UNO R3 Board ATmega328P USB Cable(Arduino-Compatible) for Arduino

Description: ----The RX and TX LEDs on the board will flash when data is being transmitted via the USB-to-serial chip and USB connection to the computer. ----The ELEGOO UNO R3 puts SDA and SCL pins beside the AREF. Besides, there are two new pins placed near the RESET pin. One is the IOREF that allows the shields to adapt to the voltage provided from the board and the other one is reserved for future purposes. The ELEGOO UNO R3 works with all existing shields and can adapt to new shields which use these additional pins. Features * ATmega328P microcontroller * Input voltage - 7-12V * 5V Electric current: 500MA * 3.3V Electric current: 50MA * 14 Digital I/O Pins (6 PWM outputs) * 8 Analog Inputs * 32k Flash Memory * 16Mhz Clock Speed Component listing 1pcs ELEGOO UNO R3 Development Board 1 pcs USB cable It use the same ATmega328 as official Arduino UNO R3 board. The ATmega328 on the UNO R3 comes preprogrammed with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. The ATmega328 has 32 KB (with 0.5 KB occupied by the bootloader). It also has 2 KB of SRAM and 1 KB of EEPROM (which can be read and written with the EEPROM library). It use the same ATmega16U2 as official Arduino UNO R3. The ATmega16U2 firmware source code is available in the official repository. The ATmega16U2/8U2 is loaded with a DFU bootloader, which can be activated. The ELEGOO UNO R3 board can be powered via the USB connection. The ELEGOO UNO R3 board can be powered with an external power supply. Excellent welding and production quality to make sure satisfied customer experience Clearly printed pin names on the header connector, more precise and much easier to use the wires. ELEGOO MEGA R3 Board ATmega 2560 ELEGOO UNO R3 Project Super Starter Kit with Tutorial ELEGOO Mega 2560 The Most Complete Starter Kit with Tutorial ELEGOO UNO R3 Project Complete Starter Kit with Tutorial ELEGOO UNO R3 Project Smart Robot Car Kit V4 ELEGOO Upgraded 37 in 1 Sensor Modules Kit with Tutorial Control Board MEGA R3 UNO R3 MEGA 2560 UNO R3 UNO R3 UNO/MEAG Compatibility with Arduino ✓ ✓ ✓ ✓ ✓ ✓ Projects Tutorial Included ✓ ✓ ✓ ✓ ✓ ✓ Assembly Requirement ✓ No No No ✓ No Reasons to Buy Extra Points; 256 KB of Flash Memory Store; Simplification and Security; Diverse Power Methods Tutorial ofTutorial of 24 Projects, Cost-effetive Starter Kit Tutorial of 33 Projects, Powerful Mega R3 Control Board Tutorial of 33 Projects, Complete Stater Kit with UNO R3 ELEGOO EleRobot APP; FPV Mode; Obstacle Avoidance; Line Tracking Mode Updated Version, Compatibility with Arduino IDE and STM32.

Price: 15.99 USD

Location: Chino, California

End Time: 2024-08-24T08:24:35.000Z

Shipping Cost: 0 USD