DYNA MYTE 2200, 2400 upgrade THK ball screw and more

Description: Here is your chance to upgrade your Dyna Myte 2200, 2400 and possibly 2000 to a direct stepper drive system with very robust ball screw system by THK BTP0605-3.5ZZ. The plate is precision cut to allow NEMA 23 style motors....The ball screw is disassembled. Most techs do not feel comfortable disassembling Ball-Screws for the fear that they will lose their balls....Motor mount brackets have to be made from existing cad/cam and they typically take 2 days before shipping. ... As shown on Photo 6, there is NO ding on the ball returning pipe. The thread you see on Photo 6 is what is fitted in the old mounting bracket of the Dyna's as shown in Photo 3 for Z & 4 for X, Y. YOU DO NOT HAVE TO MILL THE DYNA FRAME WHATSOEVER ! Do not do that!...At this point, the only thing you have to do is mill the screw end shown on photo 10 to a size of your preferred stepper coupling. There are so many coupling out there.Each ball screw sold separately. ...The Interior Plate 12" X 12", is used to replace the main Steel plate on which all the PCB's are mounted. If you want to go as far as modifying the electrical drive system, the Aluminum plate is appropriate as it allows you easy drill and TAP. I have two plates exactly cut to the same size as the original found in the unit and 4 top and 4 bottom holes drilled for mounting it. NOTE*** when you remove the plate, the entire box becomes loose. Caution is advised. You will need to retain the small transformer and borrow a 5+ Volt from your assumed new PCB. I do have the electrical schematics of the modification on how you can turn ON/OFF spindle motor via relay control using MACH3/4 or manual. Regardless a +5Volt is needed....Working with Electrical system require good knowledge of its hazard. Make sure you are prepared for it before you get started. It will take 2 days to get shipment ready.

Price: 4.25 USD

Location: Borger, Texas

End Time: 2025-01-14T19:21:43.000Z

Shipping Cost: 0 USD