DCI Pontiac Ram Air 5 Aluminum Heads 380CFM As Cast Bare Pair 500CFM Capable

Description: As Cast Ports, Fully Machined with Seats and Guides Installed. Sold as a Pair DCI Split-Port Ram Air 5™ Product Details DCI Motorsports Inc. has brought back the ultimate, ultra rare, holy grail of Pontiac’s: The legendary Ram Air 5 cylinder head. Not only have we reproduced this legend in aluminum we also put it on steroids. If you are a Pontiac enthusiast and love Pontiac’s. You have probably dreamed about owning the most rare and highest performance cylinder heads Pontiac Motor Division had to offer. The RA5 engines are extremely rare as they were never released on a production vehicle from GM. The only way you could get a set of these bad boys was over the counter at a GM dealership, until now! Now you can live the excitement that PMD wanted you to experience. More about DCI Split-Port Ram Air V Heads The DCI Ram Air 5 heads will bolt onto a factory block with bores as small as 4.15 A factory valve cover fits without modification All of our castings are cast without combustion chambers so that we can update them for the intended application. Custom chambers are available for an additional fee. Every chamber is CNC’d to insure everyone is exactly the same. Our heads even have all the original bolt hole locations for early and late alternator and power steering brackets. Our exhaust ports are raised up a 1/2″ from factory to help straighten out the severe dog leg found in the factory heads. Requires a DCI Ram Air 5 Intake Manifold. Split-Port Ram Air 5 is a trademark of DCI Motorsports, Inc. DCI Ram Air V Head Features Factory original exterior (factory look) Cast from 356A-T6 Aluminum Early and late model accessory bracket holes 380+ CFM as cast Capable of 500+ CFM with porting Will fit factory blocks with a 4.150″ bore or larger 1″ nominal deck thickness Interlocking valve seats CNC machined combustion chambers for accuracy Raised intake port 1″ over factory High velocity split intake ports for impressive throttle response and torque Spark plug location centered on bore for better flame propagation 10° valve angle for a straighter port entry and exit Capable of 2.400″ intake or 1.740″ exhaust valves Rocker arm stud holes Heli coiled for added strength Exhaust header bolt holes Heli coiled for added strength Plenty of material added for porting Improved 1-7/8″ round exhaust ports for better scavenging Capable of 800+ HP on pump gas as cast with minor clean up (Dyno proven !!) Flow data with street porting Flow data with 2.250″ intake valve and 1.68″ exhaust valve with our Street Porting Flowed on a Super Flow 600 bench at 28″ of test pressure on a 4.25″ test fixture. Intake flow Lift CFM 0.1″ 84 0.2″ 155 0.3″ 203 0.4″ 260 0.5″ 316 0.6″ 370 0.7″ 403 0.8″ 420 0.9″ 430 1.0″ 439 Exhaust flow Lift CFM 0.1″ 64 0.2″ 114 0.3″ 141 0.4″ 170 0.5″ 201 0.6″ 238 0.7″ 256 0.8″ 265 0.9″ 272 1.0″ 280 Flow data with competition porting, bracket racing, or heads up Flow data with our competition porting, Bracket racing, or heads up, no welding or moving guides, on a 4.250″ test fixture at 28″ test pressure. 2.350″ intake valve, 1.67″ exhaust valve intended for a 4.350″ bore: Intake flow Lift CFM 0.3″ 242 0.4″ 316 0.5″ 370 0.6″ 418 0.7″ 448 0.8″ 477 0.9″ 488 1.0″ 501 Exhaust flow Lift CFM 0.3″ 143 0.4″ 185 0.5″ 219 0.6″ 244 0.7″ 257 0.8″ 269 0.9″ 287 1.0″ 297 I spoke with your wife and she said you deserve to get what you've always dreamed of so go ahead and place your order! Note: DCI Ram Air V heads are not legal for sale or use in California or other states with similar laws / regulations.

Price: 3499 USD

Location: Brownsburg, Indiana

End Time: 2023-12-29T20:28:16.000Z

Shipping Cost: 0 USD