Description: Normal 0 false false false EN-US X-NONE X-NONE Technical Product BulletinCARBON FILLED ELECTRICALLY CONDUCTIVE EPOXY 100gmNote: This Product is not to be used for windshield/ Windscreen/ Rear Window repair. PRODUCT DESCRIPTION:AA-CARB 61 is an epoxy adhesive and coating formulation based on conductive carbon.AA-CARB 61 is recommended for electronic bonding and sealing applications that require both fine electrical and mechanical properties.AA-CARB 61 cures at room temperature or can be accelerated with mild heat to form a tenacious bond between similar and dissimilar substrates. GENERAL PROPERTIES:AppearanceBlack Cure TypeHeat cure or Room temperatureBenefitsContinuity of conductivity High adhesion Wide operating temperature rangeMix Ratio by weight100:10 / Resin:HardenerSubstratesAluminum, copper, magnesium, steel, bronze, nickel, ceramic, glass, phenolic, G-10 epoxy glass boardsOperating Temperature-50 to 145 °CTypical ApplicationsElectronic bonding and sealing applications that require both fine electrical and mechanical properties.Shelf Life6 Months UNCURED PROPERTIES:Compressive Strength, psi13,000Specific Gravity, mixed1.35 g/ccPot Life30 minutes CURE SCHEDULE:15 minutes @ 100°C 1 hour @ 60°C 24 hours@ 25°C MISC PROPERTIES:Volume Resistivity: ohm • cm: < 40 Tensile Strength, psi: 8,500Shrinkage Linear: 0.003 in/inHardness, Shore D: 85 GENERAL INFORMATION:For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS). HOW TO USE:1) Carefully clean and dry all surfaces to be bonded.2) Apply AA-CARB 61 completely mixed adhesive to the prepared surfaces, and gently press these surfaces together. Contact pressure is adequate for strong, reliable bonds; however, maintain contact until adhesive is completely cured.3) Some separation of components is common during shipping and storage. For this reason, it is recommended that the contents of the shipping container be thoroughly mixed prior to use.4) Some ingredients in this formulation provided may crystallize when subjected to low temperature storage. A gentle warming cycle of 52°C for 30 minutes prior to mixing components may be necessary. Crystallizedepoxy components do not react as well as liquid components and should be re-dissolved prior to use for bestresults. AVAILABILITY:This epoxy can be supplied in various different packages. Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
Price: 101.99 USD
Location: Warwick, Rhode Island
End Time: 2024-10-11T01:24:16.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Atom Adhesives
Model: AA-CARB 61-100
MPN: 61-100
Country/Region of Manufacture: United States