Description: Cherry (Quarter Cut grain) composite wood veneer sheet 48" x 96" with paper backer. (4' x 8' x 1/40th" thickness). Composite means that the wood has been dyed and cut in a process to make each sheet consistent in color and grain. It is real wood sometimes referred to as "recon" (reconstituted or engineered) wood. Advantage to this wood is that it is very clean and doesn't have the natural "defects" and markings found in regular grown Cherry. Picture is approximately 4" x 4" section. (ID code # 921). Considered Quarter Cut which means straight or tight grain as opposed to Flat Cut which is wider open grain (also available). Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995. Visit My eBay Store: JSO Wood Products Other sizes, backers and unbacked veneer may be available. About pictures: Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so. Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular. Thickness: (will not always be exactly correct, but relatively close) Paper-backed veneers = 1/40” Wood-backed veneers = 1/25” Raw plain veneer with no backing = 1/32”-1/42” How to cut: generally cut with a razor/box knife or similar tools and some type of straight edge. How to apply: Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying. How to finish: most any conventional finishing products can be used with veneer that is applied correctly. Disclaimer: Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldn’t impact overall quality or satisfaction. There may also be some minor wood filler used to fill cracks and other crevices that may exist. Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product and is rarely ever perfect. Some sanding is usually required before finishing to prepare the surface for a finish and occasionally to remove veneer tape, splice glue, or some other imperfection.
Price: 130 USD
Location: Louisville, Kentucky
End Time: 2024-03-07T23:10:35.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
MPN: Does Not Apply
Model: Composite recon reconstituted engineered veneer QC
Brand: Cherry composite wood veneer sheet with paper back
Cherry composite wood veneer sheet paper: Backer Quarter Cut 1/40" thickness thin roll Q/C
UPC: Does not apply
