Frank & Eileen

Castle Creations Mamba X Waterproof 1/8 Brushless Combo w/1515 Sensored Motor

Description: The Castle Mamba X Waterproof 1/8 Brushless Combo is a pint size powerhouse. The ROAR APPROVED Mamba X ESC has been combined with the 1512 1.5Y 1800kv motor to give lighter 1/8th scale buggies, 4wd short course trucks and bashers under 9 pounds another option to overpower their rigs!The Mamba X represents the latest and greatest in Castle Creations ESC technology, and it delivers amazing race capabilities for 1:8th scale eBuggy. After being extensively race-tested by Castle Creations' Lead Mechanical Engineer and Team Driver, Taylor James - the Mamba X has been approved for eBuggy racing with Castle's most popular 15 Series Motors. The 1515 1Y 2200kv motor is normally paired with the 1/8th scale Mamba Monster X ESC; but if you need to save some weight or can benefit from a smaller footprint, the Mamba X is more than capable of running this motor. This setup is recommended for 3s or 4s use in a vehicle weighing less than ~9lbs and geared for no more than 45mph. Features: ESC:Wide 2S to 6S input voltage range (3-4S LiPo MAX w/1515-2200KV MOTOR) Sensored Motor Support (Castle X-Series Sensor Harness Included)Waterproof8A Adjustable BEC (5.25V-8.0V)Data-loggingRugged CNC Aluminum CaseCastle Link Programming SupportSmartSense™Integrated CapacitorsRemovable 30mm Cooling FanIntegrated 4mm Bullet Connectors12 AWG Power WiresWaterproof SwitchAudible AlertsMotor:4-POLE 12-SLOT Rebuildable DesignQUIETSENSE™ TechnologyROAR Standard Sensor Port and Labeled ConnectionsHigh-Performance 0.2 mm Steel Lamination Stacked StatorHigh-Strength Kevlar WrapHigh-Strength, 180° C Grade, Neodymium Sintered MagnetsOversized, Low-Resistance, Gold-Plated Solder TabsOversized NMB BearingsM3 and M4 @ 25mm Mounting Hole4mm male Castle Bullet Connectors210mm length Sensor WireOptional cooling fan coming soonSilicone coated sensor board Specifications: ESC:Input Voltage Range: MIN: 2S LiPoMAX: 6S LiPo (25.2V) (Max 4s with included motor)BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5VOperating Environment: Waterproof* design allows for use in nearly any environment.Brake: ProportionalReversible: Yes, but may be disabled for racing.On/Off Switch: YesCooling Fan: Yes, factory equipped (30mm), fully removable** (see Product Use Statements below)Size: 2.14x1.39x1.18" (54.4x35.2x30.0mm)Weight (with wires): 3.56 oz. (101g)Connectors: 4.0mm female bullets for motor connection.Items Needed for Operation: Battery Connector requiredApplication Guidelines: Intended for up to 4s (25.2 Volt) operation in vehicles weighing less than 9bs/4kg with 1515 - 2200kv motor. SW VS. 1.82 ROAR APPROVEDMax. Recommended Vehicle Weight: Less than 9bs/4kg, with batteries, ready-to-runProgrammability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software.Telemetry Link Capable: YesMotor:Input Voltage Range: 3-4S LiPo w/Mamba X ESC Kv: 2200Max. RPM: 60,000Size: Length: 75.4mmDiameter: 40mm (41.4mm with fins)Weight (w/wires): 429g / 15.1ozShaft Length: 20mmShaft Diameter: 5mmMounting Hole Specifications: M3 and M4 @ 25mmCooling Fan: Optional, coming soon!Connectors: 4mm male Castle Bullet Connectors, includes 210mm length sensor wire.Application Guidelines: Ideal for 1:8 scale off-road and on-road vehicles as well as 1:10 scale 4WD SCT up to 9lbs on 4S LiPo Max. Recommended Vehicle Weight: See application guidelinesRunning modes: SMARTSENSE™, Sensored onlyProduct Use Statements: *Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.**The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.NOTE: Mamba X setups frequently hit 100+ amps in peaks and not all LiPos are created equal. Surge ratings should never be used to determine a pack's suitability for a brushless application. Recommended battery capacity for 1:10th and 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell).Experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups.Applying voltages higher than 25.2V will cause irreparable damage to ESC.High-current connector designed for high-powered electric systems, rated for 70+ amps is required. Invest in connector sets made for high-powered electric systems such as Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs

Price: 247.99 USD

Location: Coshocton, Ohio

End Time: 2024-03-15T18:29:25.000Z

Shipping Cost: 0 USD

Product Images

Castle Creations Mamba X Waterproof 1/8 Brushless Combo w/1515 Sensored Motor Castle Creations Mamba X Waterproof 1/8 Brushless Combo w/1515 Sensored Motor Castle Creations Mamba X Waterproof 1/8 Brushless Combo w/1515 Sensored Motor

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Seller

All returns accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money Back

Modified Item: No

Custom Bundle: No

Compatible Fuel Type: Electric

Type: MOTOR/ESC COMBO

Compatible Vehicle Type: Cars, Trucks & Motorcycles

Compatible Scale: 1:8

Compatible Motor Type: Brushless

MPN: CSE010015505

Brand: Castle Creations

Recommended

Castle Creations 010-0145-00 Mamba Monster X Waterproof Electronic Speed Control
Castle Creations 010-0145-00 Mamba Monster X Waterproof Electronic Speed Control

$141.38

View Details
Castle Creations 1/18 Sidewinder Micro 2 ESC & 4100Kv Sensorless Brushless Motor
Castle Creations 1/18 Sidewinder Micro 2 ESC & 4100Kv Sensorless Brushless Motor

$87.95

View Details
Castle Creations Mamba Monster 2 1/8th Scale Brushless ESC 010-0108-00 Brand New
Castle Creations Mamba Monster 2 1/8th Scale Brushless ESC 010-0108-00 Brand New

$132.99

View Details
Castle Creations Mamba X Waterproof 1/10 Scale Brushless ESC 010-0155-00 New!!
Castle Creations Mamba X Waterproof 1/10 Scale Brushless ESC 010-0155-00 New!!

$149.69

View Details
Castle Creations 010-0165-00 Mamba Monster X 8S 33.6V 1/6 Waterproof ESC
Castle Creations 010-0165-00 Mamba Monster X 8S 33.6V 1/6 Waterproof ESC

$179.95

View Details
Castle Creations 060-0066-00 Motor 1410-3800KV 4-Pole Sensored Brushless Motor
Castle Creations 060-0066-00 Motor 1410-3800KV 4-Pole Sensored Brushless Motor

$69.00

View Details
Castle Creations 1415 1Y 4-Pole Sensored Brushless Motor w/5mm Shaft (2400kV)
Castle Creations 1415 1Y 4-Pole Sensored Brushless Motor w/5mm Shaft (2400kV)

$119.95

View Details
Castle Creations Copperhead 10 1/10 Waterproof Sensored ESC 16.8V (BM)
Castle Creations Copperhead 10 1/10 Waterproof Sensored ESC 16.8V (BM)

$110.95

View Details
Castle Creations BERG 4 Channel Full Range RC Airplane Receiver
Castle Creations BERG 4 Channel Full Range RC Airplane Receiver

$15.00

View Details
Castle Creations 1515/1Y 2200kv 1/8 Scale Sensoless Brushless Motor 5mm Shaft
Castle Creations 1515/1Y 2200kv 1/8 Scale Sensoless Brushless Motor 5mm Shaft

$74.99

View Details