Description: The Carver M-1.5 and M-1.5T amplifiers used two Dual Capacitors for the Low Voltage Rails. These capacitors had a 50v / 80v rating respectively. These Dual Capacitors are No Longer made, and No longer available.This PCB solution provides a quick and easy way to replace these aging capacitors with newer, easily available, and better rating capacitors. For best results using this PCB kit, I have provided you the following capacitors:C1, & C3 Nichicon UVR2A222MRD 2200uf 100VC2 & C4 Nichicon UPW1J222MHD 2200uf 63V These capacitors are available from Mouser & Digi-Key and usually in stock! You can use other brands, but you will want to check the lead spacing, lead diameter, and part diameter compared to the Nichicon parts for best results. This Complete DCR-1A kit includes:1 Low Voltage Rail capacitor PCB.2 2200uf 100V caps2 2200uf 63V caps 4 Straight Pins.1 Detailed 8 Page Instructions with Color Photos. The hardest part of doing this project is the de-soldering of the OLD dual capacitors. There are 16 solder points that will need to be de-soldered in order to remove the OLD caps. You will only be using 8 of the holes for re-assembly! The PCB was designed so that your re-assembly is quick and easy!!!
Price: 30 USD
Location: Dayton, Ohio
End Time: 2023-12-11T22:43:45.000Z
Shipping Cost: 10.2 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
MPN: Does Not Apply
Brand: Carver
