Brake line kit for Desoto 1946-1958 -replace corroded lines!

Description: Brake line kit for Desoto 1946-1958 -replace corroded lines! Buy for the future brake job!!! Desoto 1946 - 1958 note, we included two 1/4" lines in this kit as the line from the master cylinder in a few models require this line. This is a metal brake line replacement kit. All lines are supplied double-flared at each end with S.A.E. specified male inverted flare fittings attached and are ready for quick and easy installation. All brake lines have an extra long nut on one end to seat in late model deep-seated wheel cylinders. These malleable lines are easy to bend or coil without collapsing the tubing or restricting the flow of brake fluid. Six couplers are included to join lines where necessary. Instructions are also included. this kit is for the following: This kit contains all the lines to do a wide variety of cars, and many different configurations, so you will have unused lines in any installation. These extra lines are a bonus that can be used for other projects The tubing is double walled, seamless and copper fused with a special inner and outer coating to provide protection from abrasion and corrosion. This is the same tubing that is used on new cars! All lines are slighly longer than OEM to allow for "lazy" DIY bends. If you need a very sharp bend next to the flare at the end of the line, you will need a bender listed under "tools/supplies" on our Ebay store. All unions are solid brass to stop rust. All lines are made in USA or Canada and are 3/16" outer diameter with a factory flare. In any correspondance please be specific and include our ebay # EE25976 Powered by SixBit's eCommerce Solution

Price: 66.77 USD

Location: Duluth, Minnesota

End Time: 2023-09-29T23:25:45.000Z

Shipping Cost: N/A USD