Description: Bendpak HD-14T 14,000 Capacity Tall Lift/82" Rise 4 Post Lift The industrial-quality HD-14T is a full-sized lifting force designed specifically for parking higher-profile vehicles beneath the raised platform. With this four-post lift, you can push 14,000 lbs. worth of automobile into the air without breaking a sweat. Features 14,000-lb. lifting capacity. Extra lift height. Long-style approach ramps for low ground clearance vehicles. Runways include rail-kit for optional accessories. Single hydraulic cylinder mounted underneath runway. Fully enclosed lifting cables, safety locks, and sheaves. Internal anti-sway slider blocks in each column. Pneumatic push-button safety release. Features heavy-duty 1/2" aircraft cable. Safety locks enclosed in columns minimize pinch points. Hardened-steel sheaves with self-lubricating bearings. Multi-position safety locks in each column. Customizable power unit location. Approach ramps incorporate built-in rear-wheel chocks. Independent backup slack-cable safety latches. Optional RJ-7 air-hydraulic bridge jacks increase service capability. Specifications Model HD-14T Lifting Capacity 14,000 lbs. / 6,350 kg Max capacity at Front Axle 7000 lbs. / 3175 kg Max capacity at Rear Axle 7000 lbs. / 3175 kg a Min. runway height 7.5" / 194 mm b Maximum rise 82" / 2,083 mm c Maximum lifting height 86.5" / 2,197 mm d Overall width1 127.5" / 3,239 mm d1: 126 / 3,200 mm e Outside length 205" / 5,205 mm f Overall length 234" / 5,927 mm g Height of post 101" / 2,543 mm h Distance between posts 115.5" / 2,938 mm i Drive-thru clearance 98" / 2,482 mm j Runway width 20" / 508 mm k Runway length 195" / 4,953 mm l Width between runways 34.5" or 41.5" / 876 - 1,054 mm m Runway centerline 54.5" or 61.5" / 1,384 or 1,562 mm n Outside edge of runways 74.5" or 81.5" / 1,892 or 2,071 mm Min. wheelbase @ rated capacity (2) 135" / 3,429 mm Min. wheelbase @ 75 capacity (2) 115" / 2,921 mm Min. wheelbase @ 50 capacity (2) 100" / 2,540 mm Min. wheelbase @ 25 capacity (2) 80" / 2,032 mm Maximum operating pressure 2,250 PSI Safety Lock positions 17, spaced every 4" / 102 mm Lifting time 65 seconds Motor (3) 220 VAC, 60 Hz, Single Phase 1. Overall Width is defined as the dimension outside to outside of the Baseplates. Use d1 measurement listed above for creating Chalk Lines. The d measurement above includes the Bolt heads that stick out near the bottom of the Posts used for securing the Safety Ladders. 2. The Lift supports less weight than its rated capacity if the Vehicle's wheelbase is shorter; this is because the wheels are closer to the middle of the Runways, where there is less strength. For example, the maximum weight allowed on the Lift for a Vehicle with a wheelbase of 100" is 50 percent of the Lift's rated capacity (or 7,000 lbs. when the rated capacity is 14,000 lbs.). 3. Special voltages available upon request. * Specifications subject to change without notice. Optional Accessories (*Sold separately) WSA-100 Rolling Oil Drain Pan Boat Trailer Platform Telescoping Sliding Jack Platform Downloads Manual **Bendpak charges sales tax in California** ***It is the buyer's responsibility to unload the freight at their location.
Price: 7974.75 USD
Location: Dover, Delaware
End Time: 2024-11-21T17:52:34.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Brand: Unbranded
MPN: N/A
