Automation Components Inc {ACI} ATL Analog To 4 Trip Lvl Adj Relay

Description: Analog To 4 Trip Lvl Adj Relay The 3/8-Inch Analog To 4 Trip Lvl Adj Relay is a simple, economical, relay-actuated circuit protection device used to control output circuit energization in response to input or monitored conditions. The unit is a 2 wire changeover type designed for automatic switching of 20Amp maximum, resistive load voltages up to 125VAC and 250VDC. It is suitable for use in power transformer outlets, contactors, lines voltage and other types of contactor switches. The {ACI} ATL Analog to 4 Trip Level Adjust Relay is typically used in applications that require one or more devices be turned on or off based on the relative position of a mechanical part like a float, a thermocouple, etc. (note that resistive switches like our ZTA series provide similar functionality). The ATL relay series is a full range of AC and DC trip level adjustable relays. Operating from 0 to 28 VDC or 4 to 30 VAC, these rugged relays are engineered for ease of use and performance. The most common trip levels are spaced at 10V intervals. Other trip levels are available on order within the operating ranges above. the ATL series is packaged in a robust Duroplast enclosure rated UL 94-VO and meets CSA 22.2, Numbers E5020/1-14. ACI's ATL Relay is a single channel relay with 4 trip levels that can be user selected to provide up to 4 different trip levels. This device is housed in a nylon screw base enclosure. The ATL Relay is intended for use as an operator reset switch. Its selection of trip levels makes it very versatile for use in a wide range of applications. The ACI 4 Trip 24V Relay is designed to regulate 4 SPDT relays at one time. The ACI ATL is a 1H / SPDT relay capable of switching from 0-5V analog signal to 4-20mA output. The ATL operates through a single input and is used in a variac application, shown below, which allows users to make incremental changes to the output voltage by adjusting the analog input. In this situation, the ATL provides an alternative to DCF03 controller shown in variac application K8016B The Controller Controls up to 4 sets of Loads for 14 stages of speed, with a maximum current rating of 20 amps per channel. The Controller protects against short circuit, and thermal overload. Also includes an audible alarm. This relay can be used for auto cooling applications such as radiator fans, power steering pump, turbo fan etc.

Price: 132.28 USD

Location: Morton Grove, Illinois

End Time: 2025-01-09T13:56:14.000Z

Shipping Cost: 0 USD