Description: Removex is a highly effective chassis degreaser and cleaner, developed to remove heavy dirt such as oil, grease, clay, mud, and organic matter from chassis, iron and wood bodies. How to use: 1. For heavy cleaning, spray the product diluted in a ratio of 1L to 10L of water on the surface to be applied 2. Wait 1 to 3 minutes and then rinse thoroughly with a jet of water 3. In case of lighter cleaning, the product should be diluted in a greater proportion Alumax is an acidic scale cleaner, developed for cleaning wheels, chassis, engines, aluminum trunks, stainless steel bodies and wood. It is a concentrated and economical product to use, acting on dirt and removing all the adhered surface layer. DILUTION: 1:10 Note: Depending on the dirt, it can be diluted more or less. HOW TO USE: Dilute the product to the indicated concentration; Apply to the entire surface to be cleaned, using a spray or gun resistant to acid products; Wait 1 to 2 minutes and then remove the excess well with a jet of water. Engine Varnish protects, shines and renews all surfaces in the engine compartment, such as metal and plastic parts, painted surfaces and rubber hoses. Engine Varnish forms a lightly lubricated film that penetrates difficult to reach places and adheres to all the surfaces mentioned. Engine Varnish is resistant to high temperatures and lasts up to three months. It can also be used on chassis and wheel arches, providing the same benefits as its application on the engine. -High Protection Power for Plastics and Rubber -High durability (up to 4 months) -High Shine Power For many years, the finishing product for shining after cleaning the engine was diesel oil. The big problem was the smell, it was flammable and over time it dried out the car's rubber and connectors. To put an end to this, engine varnish arrived on the market. These products are formulated to leave metal, plastic and rubber parts shiny, as well as protect them against wear (in the case of plastics and rubbers). They leave a shiny finish that can be controlled by removing excess, leaving a more original finish. Some of them can also be used on wheel arches and chassis. HOW TO USE: 1- The surface must be clean and dry. 2- Using a spray gun or a solvent-resistant sprayer, apply a small amount of the product until the part is completely covered. 3- Allow to dry for a few minutes. 4- If you want a drier finish, remove excess with a clean, dry microfiber towel. Alumax is an acidic scale cleaner, developed for cleaning wheels, chassis, engines, aluminum trunks, stainless steel bodies and wood. It is a concentrated and economical product to use, acting on dirt and removing all the adhered surface layer. DILUTION: 1:10 Note: Depending on the dirt, it can be diluted more or less. HOW TO USE: Dilute the product to the indicated concentration; Apply to the entire surface to be cleaned, using a spray or gun resistant to acid products; Wait 1 to 2 minutes and then remove the excess well with a jet of water. Contains: -01 Removex Engine and Chassis Cleaner 1.5L -01 Vonixx Alumax Concentrate for Vehicle Automotive Wheels Aluminum Cleaning 1.5L -01 Engine Varnish Vonixx 1.5L
Price: 150 USD
Location: BeautyFair Distribution Center
End Time: 2024-10-25T20:14:56.000Z
Shipping Cost: 19.98 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: VONIXX
MPN: 1B1
