Aero-Lites Evolution 12-Volt LED Aircraft Tailfin/Rear Nav/Strobe Light

Description: Voltage:10.5~15 Volt DCPower: Nav: 0.62amps (8.68watts) Strobe: 1.12amps Peak; 0.40 Avg Dimensions:2.16"L x 1.71"W Weight:0.16lbCertifications:Intended for non-certified applications onlyDESIGNED | DEVELOPED | DISTRIBUTED BY PILOTS ; FOR PILOTSIN THE USA Evolution Series | LED 2-in-1 Tailfin Nav/Strobe Assemblies DESIGNED | DEVELOPED | DISTRIBUTED BY PILOTS ; FOR PILOTS IN THE USA The Evolution Series 2-in-1 tail (rear-facing) nav/strobe assembly is a true to form, direct replacement for legacy Whelen and Grimes tail nav/position light fixtures with 12-volt electrical systems. Replaces the inefficient, but also failure prone filament-type fixtures with high-efficiency extreme output led technology. The assembly incorporates two separate circuits: 1- Continuous duty white nav light; 2- High-intensity LED strobe/anti-collision light. The Evolution taillight assemblies are designed as direct replacements to the legacy taillight fixtures and also includes a high intensity strobe circuit that is totally self contained which eliminates the need for remote strobe power supplies that are heavy and notorious for creating radio interference. NON-TSO; NOT APPROVED OR INTENDED FOR INSTALLATION ON CERTIFIED AIRCRAFT Integrated anti-collision strobe - instantly add safety/visibility enhancing strobes without the hassle of heavy (and notorious for RF interference) remote mounted strobe power supplies. Direct replacement fixture - eliminates extra drilling and paint/bodywork time and cost. Maintenance Free - Eliminate recurrent maintenance time/cost - designed to perform for thousands of hours which eliminates time and cost associated with legacy filament bulbs and strobe tubes/power supplies. Extreme LED brightness - many times brighter than legacy filament products. Low current - Brighter, but draws a fraction of the current of the legacy filament bulbs No external power supplies - Reduces weight and installation complexities. Requires only power (12-volt DC) and ground with optional sync wire for strobe synchronization if desired). EMI/RFI-Free - No more frustrating audio noise from high current and/or high voltage strobe power supplies. Low voltage - only requires buss voltage, which eliminates chances of electrical shock from high voltage power supplies while performing maintenance. Voltage: 10.5~15 Volt DC Power: Nav: 0.62amps (8.68watts) Strobe: 1.12amps Peak; 0.40 Avg Dimensions: 2.16"L x 1.71"W Weight: 0.16lb Certifications: Intended for non-certified applications only

Price: 169 USD

Location: Thomaston, Georgia

End Time: 2024-11-18T19:29:26.000Z

Shipping Cost: N/A USD