AEM 30-5700 for CD-7 Non Logging Race Dash CarbonFiber Digital Display Universal

Description: - AUTHORIZED DEALER- AUTHENTIC PART - WARRANTY INCLUDED - FREE 30 DAY RETURNS Part Brand: AEM Part Number: 30-5700 AEM has updated its CD-7 Digital Dash Display from an aluminum enclosure to a carbon fiber composite enclosure and in the process has reduced its mass from 740g/26.1 oz. to only 595g/20.9oz. That’s almost 1/3rd lbs. less and makes the CD-7 Carbon the lightest graphical dash of its size among major competitors!CD-7 Carbon Digital Dash Displays feature a full-color, daylight readable screen surrounded by a tough, lightweight flow-molded carbon fiber composite housing. Seven ultra-bright LEDs span the top of the display housing for RPM and shift light indication. Users can program them to ascend in specific increments based on RPM range and flash when it is time to shift. Brightness is user programmable on the fixed color LEDs. Two large buttons are included on the face of the display, allowing easy page changing and memory resetting even with driving gloves on. These button functions are included in the supplied rear connector, allowing the user to mount remote buttons. Two additional programmable LEDs are located above the toggle buttons on the top of the housing on either side of the integrated LED shift lights.CD-7 Carbon Dashes can simplify the update of an instrument cluster or ease the instrumentation configuration of a new vehicle build. Since the CD-7 Carbon only requires a single cable for power, ground and receiving CAN data, the wiring goes from complex to a simple one plug connection. Street rods, kit cars, and resto-mods using late-model crate engines no longer have to be concerned with adding a full set of gauges and trying to keep the wiring clean, or having to double up sensors on the engine so the ECU and gauges both have data – The CD-7 Carbon can see everything the ECU is seeing via a single cable connection – and that means so can you!The CD-7 Carbon receives channels from CAN bus inputs and it does not require special modules to read AEM and/or 3rd-party CAN signals. It communicates with 45 AEM devices, is in-house tested to work with 159 non-AEM devices and we have DBC CAN files for 52 more non-AEM devices. The bus configuration and messages are fully configurable; it even supports indexed messages. Custom CAN configurations can be imported via industry standard DBC files or the user can manually enter each message and channel. The user can then rename, filter, calibrate, change units and log any CAN channel, as well as direct these channels to inputs on our pre-defined or user-created templates.The CD-7 Carbon’s warning and alarm features put an end to obscure warning LEDs! DashDesign software features a powerful alarm editor to create warning alerts and alarms for any incoming channel using customizable text in almost any language. This allows you to see warnings and alarms with text values that you can program and eliminates having to guess the meaning behind a triggered warning LED or generic alarm like a check engine light. We designed a dedicated alarm page that brings your attention to the dash in the event of a potentially catastrophic issue. The CD-7 Carbon triggers the alarm page whenever a user definable condition is met. This includes the status of the channel that triggered the alarm (for example, low oil pressure, low fuel pressure, high coolant temp, etc.), and if multiple alarm conditions are present, the CD-7 Carbon will scroll them on the screen in order of priority so you are aware of every critical alarm condition. This user-defined and user-prioritized scrollable feature is included for text warnings on the main pages as well.The CD-7 Carbon Digital Displays are fully configurable and completely unlocked, so you will never pay for additional software features. They include seven total pages; a startup page, four main pages for viewing channels that can be toggled using the left button on the housing, a unique ‘On-Change’ page and a dedicated Alarm event page. All pages are 100% customizable; Use our layouts or create your own and put whatever channels you want wherever you want on the screen.FeaturesFull color 7” screen with 800x480 resolutionDirect sunlight readable (1000cd/m2 brightness and anti-glare filter)Layout files interchangeable with all versions of the CD-5 CarbonWiring interface/harness is identical to the CD-5 CarbonRugged, lightweight flow-molded carbon fiber composite enclosureTotal display weight of 20.9 oz. / 595 gramsIP65 water resistance - open cockpit, marine and motorcycle safeAccepts channels from two separate user programmable CAN bus connections – works with AEMnet enabled devices and non-AEM 3rd party devices side by sidePlug & Play Adapter Cables available for Holley, Link, MSD Atomic and Vi-Pec ECUsAccepts channels from 2008-up factory ECUs using Plug & Play OBDII CAN Adapter Cable (PN 30-2217, sold separately)Install the CD-7 Carbon on carbureted and pre-2008 stock ECU-equipped vehicles using a 22 Channel CAN Sensor Module (PN 30-2212, sold separately)Available with or without 200Mb internal logging (up to 1,000Hz/channel)Available with or without on-board 20Hz GPS receiver and antennaAdd a Vehicle Dynamics Module for GPS, 3-axis gyroscope and 3 axis accelerometer for G-loads, roll, pitch, yaw, track mapping and lap timing (PN 30-2206, sold separately)Add an 8 Channel K-Type EGT CAN Module for 8 additional temps via AEMnet CAN bus (PN 30-2224, sold separately)Seven programmable pages including four Main pages, Alarm, On-Change and Start-up pagesDedicated Alarm page quickly identifies problems, programmable in almost any language! (user defined)Unique On-Change page can be used to identify map switching for boost, traction, lap times, etc.Use included page layouts and input your channels and text, or create your own from scratchFree DashDesign Graphics Editor softwareSeven LED RPM/shift light indicators on top of the housing (programmable and dimmable)Two programmable LEDsOdometer functionOver 200 supplied fully programmable SAE and custom warning icons, and you can add your own‘Headlight-in’ connection dims the dash and LEDs during night operationTwo extra switch inputs included for displaying user-triggered events (blinkers, high beams etc.)User supplied graphics can be changed based on channel values (up to the full screen size)Convert CAN bus channel values to user-defined text in multiple languagesWant to go hardcore? CD-7 Carbon Dashes make it easy. Add additional sensor data with our 22 Channel CAN Sensor Module, create custom layouts, integrate track mapping and data logging for driver coaching, see predictive and actual lap times and set user-defined prioritized alarms - it's all possible with the CD-7 Carbon Dash. Simple or Hardcore; the choice is yours and the CD-7 Carbon's capabilities are nearly limitless.ApplicationsUniversal *Parts sold are for USA spec vehicles, please contact us to verify fitment on international models. · · · SHIPPING · · · Free shipping across the contiguous 48 United States (excludes Hawaii and Alaska). Item(s) ships on the same day or within 1 business day. Delivery time is within 2 to 4 business days excluding next day deliveries. Orders over $750 require signature for delivery. Canada customers - If eBay does not collect import & duty fees during checkout, the shipping carrier will collect them prior to delivery. · · · RETURNS · · · Your complete shopping satisfaction is our #1 priority. If an item you ordered from us does not meet your expectations, please contact us within 30 days of receiving the item(s). If your order arrives damaged from shipping please contact us and we will provide a prepaid return label to send back for a replacement or refund. Returned items must be in the original packaging (including plastic wrapped items) and in brand new condition. Any returns received installed, mounted, used or missing components will be subject to return fee's. · · · PAYMENTS · · · We accept all payment methods through eBay's payment system PayPal, and all major credit cards/debit cards are accepted. · · · FEEDBACK · · · Customer satisfaction is a top priority for us. If you have any issues with your order, please let us know. We will make every effort to resolve any problems and ensure you are satisfied. · · · CONTACT US · · · We appreciate your business. If you have any questions, please message us through eBay and we will respond within 24 hours on weekdays. Feel free to browse our eBay store for other available items. Thank you again for choosing to shop with us! Powered By 3Dsellers.com - Try for Free!

Price: 1499.95 USD

Location: Bonita, California

End Time: 2024-11-22T16:59:07.000Z

Shipping Cost: 0 USD