3 Phase Energy Power Quality Analyzer with Ф8mm Ф40mm Ф68mm Ф300mm Current Clamp

Description: template ETCR5000 3 Phase Energy Power Quality Analyzer with Ф8mm Ф40mm Ф68mm Ф300mm Current Clamp Features:- 5.6 inch digital screen- Total 16pcs current clamps (each 4pcs: 008B,040B,068B,300F)- 4-channel current and voltage measurement- Automatic shut-down; Backlight function- Transient capture function- Trend chart recording and storing function- Alarm function; Snapshot function ETCR5000 Power Quality Analyzer's Basic Function:1.Transient capture functionA.Monitoring instantaneous change of power grid voltage current parameters, including the voltage current fluctu-ations, voltage current surge, sag and short supply interruption, temporary overvoltage, impact current and Cur-rent voltage instantaneous distortion.B.Instruments can store 150 sets of transient waveform at the same time.2.Starting current monitoringA.Monitoring surge current of line and the startup current when electrical equipment is starting, help to correctly design capacity.B.Can be display the RMS rising / falling curve In the startup process, the envelope curve of startup current, waveform of 4 channels current and 4 channels voltage.C.Recording about 100s after trigger, storage the current /voltage instantaneous and waveform curve of each cycle in 100s.3.Trend chart recording and storing functionStore all the test parameters of basic test functions (Urms, Uthd, Ucf, Uunb, Hz, Vrms, Vthd, Vcf, Vunb, PST, Arms, Athd, Acf, Aunb, KF,W, VAR, VA, PF, COSφ, TANφ),50 voltage harmonics, 50 current harmonics. And create the trend curve. Record data for a long time according to need(concurrent selection 20 parameters to record data for once every five seconds, you can record about 300 days.).4.Alarm functionA.Set the limit values according to need, monitoring the values whether overshoot, if overshoot will generate an alarm log, such as: voltage, current, unbalance, harmonic ratio, frequency, active power, total harmonic distor-tion.B.You can configure 40 different alarms, each group can set different monitoring parameters (including 50 harmonics, total of 123 different parameters) and limit values, also can set the shortest time of overshoot.C.The log can contain up to 12,800 alarms.5.Snapshot functionA.Any screen can be saved (screen snapshot), at the same time automatically records the time and test mode.B.Such as can save voltage and current waveform, harmonic bar chart, phasor diagram etc.C.It can save a maximum of 60 screen snapshot.6.Communication functionCommunicate with computer via USB; Monitoring software can display waveform of power quality analysis, read of the transient waveform, trend chart recording, alarm log, screenshots, and display on the computer.7.Setting functionA.The user can configuration of the time and date, configuration of the screen contrast and brightness, definition of each phase curve colors.B.Choice of type of connection to the net work.C.Configuration of the type of the current sensors and voltage ratios.D.Select Chinese menu or English menu.8.Help menu in Chinese/EnglishEvery stage of operation can press the "help" key to obtain relevant information. SpecificationPower SupplyRechargeable lithium battery pack 9.6V, external charger.Battery indicatorBattery symbol 5 grid Show the power, when the battery power is too low, prompted 1 minutes after the automatic shutdown.Working currentCurrent 490mA, the battery is full of electricity for about 8 hours of continuous work.display modeLCD Color screen, 640dots * 480dots, 5.6 inch display domain 116mm * 88mm.Clamp size008B: φ8mm; 040B: φ40mm; 068B: φ68mm; 300F: φ300mmInstrument size240mm*170mm*68 mm.Total Weight6KGChannel number4-CH voltage, 4-CH current.Line voltage1.0V~2000V.Phase voltage1.0V~1000V.Electric current008B/040B/068B/300F Current clampfrequency40Hz~70Hz.Electric quantity parameterW, VA, Var, PF, DPF, cosφ, TanφElectric energy parametersWh, Varh, Vah.HarmonicYes, 0~50 times.Total harmonic distortionYes, 0~50 times, each phase.Expert modeYes.Transient recording150 Groups.Voltage flickerYes.Starting current modeYes, 100 seconds.Three-phase unbalance degreeYes.Record300Day (record 20 parameters simultaneously, 1 points per 5 seconds).Min / MaxRecord valueThere are, can be measured for a period of time the maximum and minimum value.Give an alarm40Different types of parameter selection, 12800 groups of alarm log.Peak valueYesPhasor diagram displayAutomatically.Screenshot capacity60A.Menu languageEnglish and chinese.communication interfaceUSBAutomatic shutdownIn the alarm / trend chart recording / transient capture mode (waiting or in the middle), the instrument does not automatically shut down.In other test mode, no button operation within 15 minutes, 1 minutes after the automatic shutdown.Backlight functionThere is, for the dark places and at night.Voltage test line3mCurrent clamp length2mWorking temperature and humidity-10C~ 40 degrees C; 80%Rh below.Storage temperature and humidity-10C~ 60 degrees C; 70%Rh below.Input impedanceThe input impedance of the test voltage is 1M.PressureThe instrument circuit and the outer shell withstand 3700V/50Hz sine wave alternating current voltage for 1 minutes.insulationBetween the instrument line and the jacket shell is larger than 10M.structureDouble insulation with anti-insulation vibration jacket.Safely StandardIEC 61010 1000V Cat III / 600V CAT IV, IEC61010-031, IEC61326, Pollution degree: 2.AccessoriesHost: 1PCS; Instrument Bag: 1pcs; Test Cable: 5PCS (yellow, green, red, blue, black); Alligator Clip: 5PCS; Probe: 5PCS; Charger 1PCS; Software CD: 1COPY; Optional Current Clamp: 4PCS Parameters of current clamps Model008B040B068B300FFunctionAC current and leakage detectionTest modelClamp CT, Current induction outputClamp sizeΦ8mmΦ40mmΦ68mmΦ300mmCurrent rangeAC 10mA~10.0AAC 0.1A~100AAC1.0A~1000AAC10A~6000AResolution0.1mAAccuracy0.5% (23℃±3℃, below 70%RH)Current transformAround 1A/1mACircuit voltageLower than AC600VCable length2mWorking environment-20℃~50℃; below 80%RHStorage environment-10℃~60℃; below 70%RHWeight170gx4190gx4510gx4330gx4 1. Your valid phone number is very necessary for the shipping, otherwise we can't guarantee that the package would safely arrives. 2. Any Customs tax applied to this package should be covered by buyers. 3. As has been stated on the eBay item description, Import duties, taxes and charges are not included in the item price and shipping charges. These charges be at the buyer responsibility. meanwhile the customs tax depend on the buyer local customs office. What's in Package: 1x ETCR5000 Energy Power Quality Analyzer 4x ETCR008B Current Clamps4x ETCR040B Current Clamps4x ETCR068B Current Clamps4x ETCR300F Current Clamps5x Test Cable (yellow, green, red, blue, black); 5x Alligator Clip5x Probes1x Charger 1x Software CD1x Instrument Bag Contact Us: 1. We have always been trying to provide the best service and reliable products for every customer, however, accident may happen sometimes, please contact us to resolve any issue before leaving a negative feedback. 2. Please contact us by "Ask a question". Payment 1. Payment methods accepted: Paypal only. 2. Payment must be received within 7 business days of auction closing. Shipping 1. We ship your orders within 1-3 business days after the payment received. 2. Item shipped via Singapore Post or HongKong Post, It takes about 7-30 business days(USA,CA,AU,UK). Others country 10-20 business days(Brzil,India,RU), Exact delivery time depends on postal process. 3. If you do not receive your item(s) by 30 business days,Please feel free to contact us via ebay mail system, we will try our very best to resolve any problems with you. Return Policy 1. Return is accepted within 30 days after the buyer's receiving the item. 2. If this item is defective upon receipt, customer has up to 14 days from date of receipt for exchange of a new one. 3. Unused/unopened merchandise will be fully credited. Other Policies We are not responsible for any custom duty or import tax. If you need we write low price on shipping bill, pls leave message when you make payment. All emails will be answered within 24 hours. If you do not receive our reply, please kindly re-sent your email and we will reply to you as soon as possible, Suggest send eBay message to us, That is easy to find.

Price: 3347.07 USD

Location: Shenzhen

End Time: 2024-09-06T07:56:34.000Z

Shipping Cost: 0 USD