(3) Mason Jar Thumpers Wide Mouth Alcohol Distill Moonshine Thump Keg DIY Kit

Description: 3 Pack Hanging Jar Thumpers. Many customers are buying multiples and running them in line one after another for fantastic results, so we decided to make a 3 pack listing to save us all on shipping. Fast and Free from Michigan! Hanging Jar Thumper DIY kit, solder your own for Wide Mouth Mason Jars (approximately 3") Brand new. Hand crafted in Michigan (made different than most Thumpers in order to be able to hang). Unpolished copper. Includes silicone gasket. Jar not included. Made to fit wide mouth jars which come in many sizes and are readily available in 64oz half gallon size too, perfect for 5 gallon batches of wash. Made with 1/2" copper tubing (5/8" actual OD), copper fitting that has been bored out for you so the "vapor in" tube slides through, 100% pure copper cap, and we actually use a one piece pure copper cap now, not the two part as shown in some of the pictures. Everything in contact is made out of 100% lead free food grade copper. Mason jars are special high temperature FDA approved food grade jars made to withstand immediate 90 degree Fahrenheit temperature swings and way higher temperatures if done gradually like when using it as a thumper All you need to do is attach the in flow, long tube to your still, and attach the out flow, short tube to your condenser and you have successfully raised the percent abv by around 50%. This is why it is referred to sometimes as a "doubler." Several customers are hanging or configuring 3 or more of these in line and liking the product and process better than their reflux columns. See pictures for examples. Attach it your way, solder, 1/2" compression fittings, flare, or 1/2" silicone tubing. See our other listings for compression fittings and high temp food grade silicone tubing, completed thumpers or just to get other ideas. You can also use it to flavor your neutral spirits. It works very well as a flavor enhancer when filled with juice, or cinnamon, or a half a lemon, or sliced peaches, etc. This Thumper is made out of the strong thick type, red label type M, copper tubing and is designed in this orientation for strength. It is made this way to be able to hang mid air, in line with your column and condenser. It can hang freely and does not require you to find objects around the garage or house like buckets, jars and crates to support it, unlike the more common two hole design in which the copper will bend if you don't support it. Heat tolerant glass jar not included. These will fit on any wide mouth Mason canning jars. It can fit larger jars too. I found it to fit a large one gallon pickle jar and a large 3/4 gallon bean jar. You may have to cut some of the stem off or slide it up or down if you want it to fit a smaller or larger jar. We also make and list one that fits regular mouth canning jars, and one that fits Sanke kegs. See our other listings. Perfect size for 5 gallon batches or larger. Super easy to open up and clean!

Price: 64 USD

Location: Holt, Michigan

End Time: 2024-09-08T12:42:27.000Z

Shipping Cost: N/A USD