20KG RC Servo High Torque Servo Motors Waterproof Full Metal Gear Steering Se...

Description: 20KG RC Servo High Torque Servo Motors, Waterproof Full Metal Gear Steering Servo for 1/6 1/8 1/10 1/12 RC Car Robot DIY, Digital Servo with 25T Servo Horn, Control Angle 180° Note: LD-20MG model has been renamed as HPS-2018MG as part of our brand's upgrade. 20kg-180°High Torque Servo Motor: This rc servo boasts a maximum torque of 20KG.CM 7.4V, enhanced by its accompanying metal servo arm. Delivering robust power, it is housed within an anodized aluminum case that facilitates excellent heat dissipation and effectively reduces power consumption. Superior Quality & High Performance: This digital RC servo comes with metal gear and dual-ball bearings, which are well-made with exceptional performance, stability, and minimal noise output. By integrating a high-precision potentiometer, its accuracy and linearity are greatly enhanced leading to an extended service life. Perfect Servo for Model DIY & IP67 Waterproof: It fits 1/6 1/8 1/10 1/12 RC cars, robots, vehicle/boat/airplane models, and any DIY. Crafted with high precision and thorough sealing, this rc servo provides IP67 water resistance, which allows it to operate even in the presence of water splashes. Size & Weight: Size: 40*20*40.5mm (1.57*0.8*1.59inch); Weight: 68g (0.15 pound). Specifications: Weight: 65g(2.32OZ) Dimension: 40*20*40.5mm(1.57*0.78*1.59inch) Speed: 0.16sec/60°(7.4V) Torque: 20 kg·cm (277.6 oz·in) @6.6V Working Voltage: 6-7.4V Min Working Current: 1A(Our servo needs a larger current than other servo) No-Load Current: 100mA # Spline: 25T(6mm in diameter) The servo wire: 30cm(11.8inch) in length Control Specifications: Control Method: PWM Pulse Width: 500~2500 Duty Ratio: 0.5ms~2.5ms Pulse Period: 20ms Please make sure that the duty cycle of the controller you are using conform to our specifications, otherwise the servo can't turn up to claimed degree Wire Layout: Red Wire: + Black Wire: GND White Wire: PWM/Signal Package Contents: 1 x Digital servo 1 x Servo horn kit(as shown in the figure) If you have any questions, please feel free to contact us, we will help you as soon as possible Note: Please be sure to avoid locked-rotor when using servo, locked-rotor means that artificially or machine obstructs the servo to rotate normally, the locked-rotor will lead to internal current increased to more than 7 times and the temperature increases, servo will burn out. Important: 1. Connect GND is necessary. 2. It's recommended that use lithium polymer battery with high rate discharge(min 5C), please don't use dry battery. 3. Please use a short and thick power cord, don't use Dupont cord 4. Not compatible for redcat thunder drift rc car, not compatible for 1/16 scale car. Shipping We offer FREE shipping on all orders! We ship within Three business days of payment, usually sooner. We use a selection of shipping services such as UPS, FedEx, USPS etc. We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed. Local pickups and combined shipping options are not provided at this time. Return You can return a product for up to 30 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Payment We accept payment by any of the following methods:PayPalPlease pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Feedback Customer satisfaction is very important to us. If you have any problem with your order, please contact us and we will do our best to make you satisfied. Contact Us If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays. Please visit our eBay store to check out other items for sale! Thank you for shopping at our store.

Price: 26.69 USD

Location: Phoenix, AZ

End Time: 2024-11-30T18:06:01.000Z

Shipping Cost: 0 USD