Description: Product Description Comprehensive set for the removal and installation of front hub bearings No dismantle of steering assembly needed Heavy duty steel drifts Drift Size: 2-3/16", 2-11/32", 2-7/16", 2-9/16, 2-19/32", 2-13/16", 2-7/8", 3-3/32", 3-5/16", 3". 3-13/32" and 3-19/32" Hub Screws: (3) M12x11.5, (3) M14x1.5mm Suitable for most front wheel drive cars, vans & light trucks These front wheel bearing adapters replace wheel bearings while keeping the steering knuckle and strut assembly in tact on the vehicle, eliminating the need for front end alignment once the work is done Operation: Step.1 Determine if the vehicle has a trapped rotor or a floating rotor. Step.2 Assemble the tool components, and press out the worn bearing. Step.3 Lightly lubricate the new bearing, and position it for installation with the tool components assembled. Press the bearing into the spindle assembly until it bottoms. Step.4 Fasten the bearing retainer in place using the bearing retainer bolts. (On Neon vehicles, install the snap ring in the knuckle.) Step.5 Assemble tool components. Lightly oil the hub assembly, and install the hub. Attention​: The bearing installer must be assembled with the flat side toward the bearing and the small diameter pilot on the side away from the bearing. Step.6 Assemble the remaining vehicle components that were removed for bearing replacement: (1)lower ball joint to steering knuckle assembly brake rotor. (2)disc brake caliper. (3)outer tie rod nut and tie rod. (4)axle nut. (5)front tires. Everything needed for the job is included, providing the most effective removal and installation of wheel bearings. No hammering to remove and install the bearing. Avoids damaging the hub, bearing or other parts of the car. Includes multiple sizes of drifts, can be used for various car models. suits domestic and imported front wheel drive cars and light trucks. Includes 1 x Steel Drifts : 38mm 2 x Drift : 86mm, 91mm 1 x Receiver Sleeve : 76mm 9 x Adapter Drift: 55.5mm, 59mm, 62mm, 65mm, 66mm, 71.5mm, 73mm, 78mm, 84mm 3 x Hub Screw : M12 x 1.5 mm 3 x Hub Screw : M14 x 1.5 mm
Price: 46.99 USD
Location: Groveport, Ohio
End Time: 2024-10-27T01:00:00.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Construction: Heavy-Duty Carbon Steel
Warranty: 1 Year
Manufacturer Part Number: SZ6411-B
Feature: Rust-Resistant
Suit For: Various Car Models
Hub Screw: M12 x 1.5 mm, M14 x 1.5 mm
Brand: 8milelake
Type: Front Wheel Drive Bearing Puller
Unit Type: Unit
Note: No Hammering
Adapter Drift: 55.5mm, 59mm, 62mm, 65mm, 66mm, 71.5mm, 73mm, 78mm, 84mm
Set or Single Item: Set
Drive: Manual
Coating: Black Anodic Oxidation
Country/Region of Manufacture: China
Unit Quantity: 1
