1/2 Inches Diameter x 18 Inches Long Torsion Spring Winding Rods, Garage Door Wi

Description: WARNING: INCORRECT INSTALLATION OR DOOR POSITION CAN CAUSE INJURY. Product Description Use for unwinding and winding torsion springs. Torsion spring winding rods is constructed of hard drawn wire and come in 1/2", outside diameters about 18" lengths. Failure to use these rods when replacing or making adjustments to torsion springs may result in personal injury and property damage. When adjusting or replacing garage door torsion springs, it is important that these tasks are not attempted with any other tools other than with these rods Winding rods which are designed specifically for increasing (winding) and decreasing (unwinding) the tension on garage door torsion springs, and they are the only tools recommended for this purpose. ★Application: The pair of torsion spring winding rods are specifically designed for increasing (winding) and decreasing (unwinding) the tension on residential garage door torsion springs ★Must have tool: Torsion Spring Winding Rods is the only tool recommended to make torsion spring adjustments to balance the weight of a garage door. Failure to use these rods when replacing or adjusting torsion springs may result in personal injury and property damage ★Dimensions: Garage door torsion spring winding rod are 0.47inch in outside diameter and 17.7” long. They are designed to industry standard for residential garage door use, fit most residential winding cones ★Safety first: Steel torsion rods allow you to safely perform torsion spring replacements and adjustments without worrying about keeping the spring tension under control. When adjusting or replacing garage door torsion springs, it is extremely important that these tasks are not attempted with any tools other than these rods ★If you have any problem, please don't hesitate to contact us, we'll reply within 24 hours

Price: 22.16 USD

Location: Brentwood, New York

End Time: 2024-08-23T16:20:39.000Z

Shipping Cost: 0 USD